Connectify in Russian. How to configure Connectify correctly? Installing and configuring the Connectify program

Creation wireless connection access to the Internet using a Wi-Fi router allows you to use the Internet on any device anywhere in your home or office. For example, browsing websites on a laptop will no longer be limited by the length of the cable, and you can “surf the Internet” while lying on your bed or moving to different rooms. But the main advantage wireless network is to connect mobile and portable devices, which do not have connectors for connecting to wired Internet. These can be phones, smartphones, PDAs and other gadgets. For creating wireless Wi-Fi Internet you can use the Connectify program. Download it for free new version will be useful to every active Internet user.

Possibilities:

• creation of wireless Wi-Fi networks;
• creating a name for the Internet connection;
• creating a connection password;
• choosing the right router.

Principle of operation:

Let's take a closer look at Connectify. Its functions allow you to create a wireless Wi-Fi connection to the Internet for any devices within the network access area.

Before creating a connection, you need to synchronize your computer with the Wi-Fi router that will broadcast the signal. By selecting this device in the program, you can create a connection and come up with a name for it.

One of the most important moments at this stage is to create a password to restrict access to the Internet (to neighbors of your apartment, store or office). Otherwise, other people will use your Internet, significantly limiting your speed. At the same time, don't bet too much complex password so as not to forget it and not get into a stupid situation.
You can install Connectify on Windows XP, Vista, 7 and 8.

Pros:

• Creation wireless access to the Web;
• restricting access to the Internet using a password;
• the ability to download Connectify to your computer for free;
• simple interface.

Minuses:

• English interface.

The program we tested allows you to create wireless Wi-Fi networks. To restrict access to your network to unauthorized persons, you can use a password.

The only drawback is the English-language interface, but, in general, working in the program is simple and understandable.

Connectify Hotspot Lite - free program, allowing you to create virtual router right on your laptop. Other computers, tablets and phones will be able to connect to it via Wi-Fi.

Let's imagine a situation - you have a laptop connected to the Internet. Via cable, ADSL modem or Wi-Fi (with device connection restrictions). But there is no router, because you have not yet purchased it or it is broken. Or maybe you are in a hotel with a laptop, where you have to pay extra for each connected device. At the same time, next to you is your spouse with a tablet or friends with smartphones who also need the Internet.

You can find a way out of this situation in no time by creating your own virtual router. First, you will need to download the Connectify program. Although it’s still correct to write “Connectify”, you still won’t be able to download it in Russian, since the developers presented their product exclusively in English language. Secondly, you will have to configure some settings and restart the laptop.

Now more details. After installing the program, you will see its icon in the system tray. By clicking on it, you will open the menu of this software with fields that need to be filled out. First, you will be asked to name your access point and come up with a password for it. Next, you will need to select the network through which the laptop accesses the Internet and indicate the distribution method - with or without encryption. After that, just reboot the system - and hurray - your laptop distributes Wi-Fi.

If suddenly nearby devices do not see the newly created point, go to the Network Control Center and “allow other devices to see your computer.”

Possibilities:

• creating an access point on a laptop with Wi-Fi support;
• setting a password for connecting to the Network;
• display of connected devices;
• installation of WPA2-PSK encryption, which blocks viruses and hacker attacks;
• calling the menu from the tray.

Advantages:

• Creation own Wi-Fi without a router;
• quick setup;
• setting a password for access;
• laptop performance remains at the same level;
• Connectify consolidated distribution - free download on Windows 7 or 8.

Things to work on:

• there is no Russian-language interface;
• may be blocked by firewall;
• the signal disappears when the laptop goes into standby mode or hibernation;
• The free version of the program turns off the point after 90 minutes.

It is also worth mentioning the differences between the program we are considering and the paid one. Pro versions. They boil down to the fact that you cannot get rid of the prefix “Connectify-” in the name of the point, you cannot distribute the Internet from 3G to 4G networks, and more Wi-Fi will disappear when the computer starts to fall asleep. Last question You can partially solve this by going to “Network Center - Change adapter settings - Properties” and uncheck the “Turn off device to save battery” checkbox. As for the remaining points, in most cases they are unimportant.

Let us add that the signal distribution distance depends on the adapter built into the laptop - indoors the radius is usually 30 meters. But take into account the characteristics of the propagation environment - barriers can significantly reduce this area.

This program can largely replace standard router, creating its virtual analogue. Easy setup Connectify, which takes no more than five minutes, will convince even beginners that creating a Wi-Fi hotspot on a laptop is not at all difficult.

Connectify will help you create a full-fledged access point without a wi-fi router for free: simple instructions and a description of how to create an access point without a wi-fi router.

Download free Connectify to your computer, which will allow you to distribute the Internet to smartphones, tablets and other laptops; the most important thing is to configure it correctly once and you can forget about its existence.

Helps those who travel a lot - at any time and anywhere where there is access to the Internet, you can set up an access point and distribute traffic through Connectify to everyone.

If Connectify does not work stably, we recommend downloading a VERY simple program: MyPublicWiFi. Just write the network name (SSID), password (at least 8 characters) and select a valid Internet connection.

In essence, the product itself is graphical shell to create an access point without spending a lot of time poking around in the command line. It is capable of working on almost all Windows systems, including Server 2008 and Windows 7. Installation occurs without any particular difficulties; if the utility fails, you need to run it as Administrator.

Yes and no free assembly- this is Connectify Pro, it supports unlimited distribution from 3G/4G Internet connections, but soon the developer promises to make this function free.

How to set up Connectify

How to set up Connectify. After installation, you need to configure your access point according to the following points:

• Hotspot Name - network name;
• Password - password;
• Internet to share - select the Internet connection that we want to share;
• Share over - the interface through which the Internet will be distributed;
• Sharing mode - network security mode (it is recommended to use WPA2).

If you select the “Open” mode, the network will not be password protected. After setup, reboot the computer (required). After the reboot, the Connectify icon will appear in the tray. To get started, double-click on the icon and click Start Hotspot. The Clients tab displays the number of devices connected to the network as well as their IP and MAC addresses.

If problems arise with distribution, we try to disable the firewall on the system. If it doesn't help, try reinstalling the network card driver. Perhaps a program from the manufacturer is installed on the computer for wi-fi control, it is also advisable to disable it or delete it.

If all else fails, then your network card is not compatible with the product, but such cases are very rare.

Instruction No. 1 taken from open sources:
1) install the program and when a reboot request arrives, refuse it;
2) go to Windows “Startup” (“Start” - “Run” or “Search” - write msconfig) and uncheck the boxes with the name of this program, namely: Connectify Hotspot and Connectify Dispatch;
3) Reboot Windows and activate as in the video below.

For Windows 7:

For Windows 8 and higher:

Instructions No. 2 Connectify, downloaded via the bootloader. All actions as administrator:
1) start the Internet (then it will turn off by itself);
2) launch ConnectifyInstaller, wait, a prompt appears to trust the driver manufacturer, we agree;
3) we do not agree with the reboot;
4) in the Crack folder run BLOCKHosts;
5) start Connectify 8 Crack, click Activate PRO, in the new window click OK, close with a cross, OK again;
6) in the Task Manager in the Startup section for Connectify programs set “Disabled”;
7) reboot (this is the FIRST reboot);
8) connect the Internet;
9) for those who do not need Dispatch, in Program Files/Connectify/run ConnectifyStartup and in the window that appears on the right, remove the 2 checkboxes relating to Dispatch and close it with a cross;
10) go to Windows/System32/Drivers/etc/ and work with hosts file, namely: right-click on it to open “Properties” and at the bottom in the Attributes check the “Read Only” box;
11) launch the Connectify shortcut (it’s better to take the shortcut from Program Files/Connectify/Connectify), a program window will open, where at the top of the blue bar in the Settings section in the Display subsection we uncheck two checkboxes, in the other Setting (on gray background) in Hotspot Name we enter your name, which will then always be reflected in all your devices to which you will distribute the Internet; in the Password line, enter your password (I don’t generate it), in the internet to Share line, select your Network from the drop-down list;
12) click Start Hotspot (at the bottom of the window);
13) go to Device Manager/Network Adapters and in two LAN and Wi-Fi drivers (I have: Realtek PCIe FE Family Controller and Dell Wirelles 1702 802.11 bgn) in Properties/Power Management uncheck the “Allow the computer to turn off this device to save money” energy." One inconvenience: every time you restart the PC, these checkboxes must be unchecked again. But this point is not required, I just read it somewhere and apply it.
If I need to view the status of a Hosted Network, I use Command line on behalf of the Administrator netsh command wlan show hostednetwork. Close the command line with a cross.
Do not agree to any updates!

Today, Internet access based on Wi-Fi distribution can be found anywhere. Any cafe can offer visitors free connection. To simplify the installation of optimal parameters, an application such as Connectify was developed. Setting up the program is not that difficult. By at least a person who has encountered Wi-Fi distribution at least once will understand it in a couple of minutes. The average user will not experience any particular difficulties either, but there are some nuances here.

What is the Connectify program?

An application like Connectify can be configured in several steps, which we will discuss now. But first, let's look at the program itself. What is she?

Roughly speaking, this is a means of distributing Wi-Fi programmatically, which allows you to literally refuse to use a router (router), assigning the built-in motherboard Wi-Fi adapter. As is already clear, if there is none, there can be no talk of using the application.

Choosing the optimal OS

Now about the most important nuance of the Connectify application. Installation and configuration with the best parameters, as evidenced by reviews from many users and specialists, involves using the utility in the Windows 7 operating system environment.

The problem with modifying XP even with the third service pack installed is that the program simply does not work in it. In distribution it turns out to be much more difficult, since access to shared networks you have to configure it manually. Moreover, in the eighth Windows versions It is very difficult to achieve stability in the application. There are often cases when a program simply “crashes” for no reason at all. Therefore, setting up Connectify will be considered specifically for Windows 7. In it, the application shows maximum performance and ease of setting the required parameters.

Connectify: how to install and configure the application? First steps. Where and what to download?

The first stage involves installing the package. First, you need to download the installation distribution from the official website, where you will be offered two options for downloading: the standard free version and the Pro modification, for which you will have to pay.

Here the choice is up to the user. After downloading, run the installation file (required as administrator) and agree with license agreement. Next, the entire process will be completed by the “Setup Wizard”, and at the end of the process you will need to reboot the system by selecting Reboot now in the final window.

Connectify setup: creating an access point

After restart Windows an icon corresponding to installed application. Now let's move directly to the question of how to set up the Connectify program. Settings are accessed by clicking on the icon. The main window appears on the screen initial settings, where you will need to enter the initial parameters.

The application interface is not Russified, so we pay attention to English names. In the Hotspot Name field, enter an arbitrary name for the future network. In this case, it is advisable not to use personal data such as last name or first name. In the next field (Password) we enter your password (it becomes active only after setting the WEP Wi-Fi Ad-hoc encryption parameter in the Sharing Mode distribution mode section. In the Internet to share item, select from the list the provider cable to which the provider cable is directly connected. In the Share line Over a Wi-Fi adapter is installed. The Pro version has two more items for firewall settings. However, apparently, few ordinary users will use paid version(the boxes are checked by default), so it’s worth noting that in the free modification of the application these two items are inactive.

After all the parameters have been entered, all that remains is to click the activation button (Start Hotspot), after which the connection icon should appear in the tray new network. Now it is completely ready for other devices to be connected to it, including mobile devices.

As you can see, the question is how to configure Connectify to optimal mode, the solution turned out to be completely simple. Now let's move on to some other useful features.

The main advantage of this application is that it has special means control of all client devices, in this moment connected to the created network. To display complete information on them, you just need to enter the Clients section. There you can also view a list of all MAC addresses. Besides, in Services section available full information about connection speed, traffic usage, active adapters, information about inactive primary and secondary devices, etc. In the History menu, you can view the history of connections, as well as analyze all data related to ever connected devices or users.

But that's not all. The program turns out to be indispensable when working with Yota devices and connections based on 4G technology. The fact is that the device itself can already be identified as network card, therefore in free version Connectify such a device works without any problems at all. True, some experts recommend not installing updates for the main application from time to time, as this may cause some communication problems. But when using Yota, you can simply play with your relatives at home using local network in multi-user mode.

Conclusion

That, in fact, is all that concerns how to configure Connectify to optimal mode. As can be seen from all of the above, the setup process comes down to just selecting a few basic parameters and, in comparison with the same setup of a wireless network using operating systems Windows systems It looks so simplified that even an ordinary user, who is completely far from understanding Wi-Fi-based distribution, will not be able to fill out the necessary fields and set the recommended parameter values.

Naturally this software is constantly being improved, but so far the experts and ordinary users there is no consensus.

Connectify Hotspot is computer program, which allows you to turn any computer and laptop with a Wi-Fi adapter into a Wi-Fi access point. Thanks to this simple utility, you can quickly organize access to a wireless network for all your portable devices (smartphones, tablets, laptops, etc.).

If for any reason you do not have wireless Internet, but you have a wired or USB modem, then the problem can be easily solved, provided that you have a laptop or computer with Wi-Fi support. The fact is that Wi-Fi adapters capable of both receiving and transmitting signals. But for this to work, you first need to download a program for distributing WiFi from your laptop.

With Connectify Hotspot, your computer will become full replacement Wi-Fi router, allowing you to create a wireless access point in just a few clicks.

Connectify is simple program For creating Wi-Fi network from a computer. The utility has an excellent interface, and, despite the lack of Russian language, the program is very convenient to use - even a novice user can figure it out. You can download Connectifi in Russian completely free of charge on our website.

Key features of Connectify Hotspot:

• User-friendly interface and quick creation new wireless network;
• Managing the utility from the tray;
• Ability to add a program to Windows startup;
• Encryption of transmitted data;
• Create a password for a wireless network;
• Minimum set of settings.

Connectify how to set up?

Step 1. First, you will need to download Connectify for free, and then install the program on your computer. After this, restart your computer.

Step-2. Launch the program window. In the “Internet to Share” column you must indicate the network that will become wireless point access; in the “Hotspot Name” column you will need to indicate the name of the wireless network, and in the “Password” column you need to enter New Password for the access point so that they cannot connect to it outside users. When you have finished entering your data, click the “Start Hotspot” button.

Step-3. Connect to a wireless network from your device. To do this, carry out Wi-Fi search, select desired point access and enter the password to connect to it.

Step-4. As soon as the device is connected to your access point, this information will be reflected in the program window. By clicking on a device you can get more detailed information about him, and also, if necessary, limit his access to the Internet.

Video instruction: Wi-Fi distribution via Connectify