What kind of memory management error is Windows 10. Eliminating the BSoD error: MEMORY_MANAGEMENT

The Windows operating system is one of the most popular “axes” among personal computer users.

Often, when working with it, an error such as “Blue Screen of Death” occurs (Figure 1). It is characterized by the fact that while using a personal computer, the operation of the operating system suddenly stops, and a Memory management windows 10 error appears on the computer screen.

Figure 1. Appearance of the blue screen of death on Windows OS

What is memory management?

So, what is the essence of a global failure in the functioning of the operating system? First of all, it occurs due to a physical conflict between RAM or permanent memory and the operating system.

The reason for the “reaction” can be due to many factors, and not necessarily, the malfunction occurs due to a breakdown of the PC’s RAM or permanent memory modules.

Reasons for the error - blue screen

A blue screen is caused by the following factors:

1. Malware and the impact of viruses.
2. Incorrectly installed and updated drivers, their absence and obsolescence.
3. Malfunction of system files, registry files.
4. Failure of the hard drive, “overloading” of the PC with files, damage to the RAM stick.
5. Frequent incorrect shutdown of the system.
6. Missing or damaged important system folders and files.
7. Incorrectly set power supply parameters.
8. Outdated BIOS.

Why does the memory management error code appear?

As a rule, the memory management Windows 10 error code occurs due to careless and inaccurate use of the computer (Figure 2). Such exploitation jeopardizes the functionality of both the software and hardware parts of the device.

When a problem first appears, you should immediately take care of choosing methods to “treat the disease.” After all, memory management windows 10 blue screen error can indicate very serious PC malfunctions and interfere with the user’s normal work.

Figure 2. An example of one of the careless uses of the computer.

How to fix memory management error in Windows 10

When a problem occurs, users use the search query: “memory management windows 10 error how to fix?”. Troubleshooting involves putting your PC and operating system in order.

Soaking: Before starting “recovery work” you will need to write down the restore point. It will be needed if unforeseen circumstances arise while trying to fix the failure. In some cases, the problem appears when trying to create a restore point. In this case, you will need to create a bootable USB flash drive or Windows 10 disk from a working computer.

The “recovery course” for a personal computer is as follows:

1) Checking your PC for viruses. To do this, you will need to use antivirus software.

2) Checking the system registry. Performed using utilities such as RegOrganizer. The programs detect failures, eliminate incorrect and damaged entries, and also optimize the operation of the system registry.

3) If malfunction occurs frequently, you will need update BIOS version to latest.

4) Regarding problems with the power supply of a laptop or personal computer, devices equipped with a battery, when operating from the network, must have Balanced power plan(Figure 3).

Figure 3. Example of setting a balanced power plan on a laptop

5) To resolve driver problems, you will need to perform the following steps:

1. a) Start the system in safe mode, this step makes it possible to avoid the appearance of new video memory management internal windows 10 errors.
2. b) In the search line you will need to enter the command: “verifier”.
3. c) In the “Check Manager” of drivers, you need to select the item “Create non-standard parameters (for program code)”.
4. d) To start the information collection diagnostics, you will need to restart the computer.

Soaking : If a blue screen appears during the test, or a system boot problem is detected, the OS will start cyclically loading. After two attempts, the diagnostic menu will launch, if it does not bring results, then from the bootable flash drive you need to go to the additional options menu, and select the “startup repair” option, after restarting the PC and select safe mode with command line support. In it you will need to enter the command “verifier / reset”, it will allow you to disable the verification, and the command to restart the PC in stationary mode: “shutdown -r -t 0”. The file with the results of the analysis can be found here: C:\windows\minidump.

Using the BlueScreenView utility, you will need to diagnose the driver causing the error (Figure 4). In the list of other components, it is highlighted in pale red. The element that is not working correctly will need to be removed and reinstalled.

Soaking : The above method is ideal for experienced PC users. For the rest, it is recommended to reinstall the operating system, first saving important data on backup media or in cloud storage. This simple and radical method, in some cases, is a truly effective method in dealing with failure.

Figure 4. BlueScreenView program interface appearance

6) Problems with PC hardware can be solved by diagnosing the condition of the RAM modules and hard drive. These operations are performed by utilities and through visual inspection of the technical components of the PC.

Soaking: If an error occurs when installing Windows 10 memory management, then the reason lies in problems with the RAM memory module or hard drive.

In custody

The appearance of the above-described malfunction is an indication that serious malfunctions have occurred in the operation of the personal computer. They appeared due to both hardware and software reasons.

To prevent their occurrence, you should carefully and carefully handle your personal computer or laptop, and also regularly check the system for failures, malfunctions and the presence of viruses.

When a problem occurs, you need to immediately diagnose its exact cause and try to fix the problem immediately. As practice shows, it is not always necessary to reinstall the system, which is the most radical and last resort measure when dealing with an error.

Among the unpleasant aspects of working with the Windows operating system, it is worth noting some system flaws that cause various types of errors. There are many reasons for the appearance of the “blue screen of death” or Blue Screen of Death, which indicates error 0x1A: memory management. Quite often, this problem is accompanied by prolonged freezing of the PC, “crash” from programs, and the computer stops working. Factors causing system failure often relate to drivers. If BSoD describes a video memory management internal error, then most likely the problem lies in the video card driver, or less often it is related to monitors. In any case, in order to correctly correct the error, it is important to understand its root causes.

Memory management error description

Inexperienced users, in the literal sense of the word, are afraid of a blue screen appearing, and immediately call a technician or try to interrupt Windows on their own. In some cases, the last method can help, but it still ranks last on the list of recommendations. To get rid of the memory management: stop 0x0000001a error, which caused a malfunction of the OS, it is not necessary to resort to extreme measures. It is enough to find out what caused the problem and try to eliminate its possible factors.

You can recognize the error by the following signs:

• the program collapses and a warning appears in the form of a blue screen describing the error;
• the computer restarts;
• the operating system responds slowly to commands and input using the keyboard or mouse;
• The system periodically freezes for a short time.

If the “screen of death” appears with any regularity, then you can track what caused this problem. Often the error appears after installing a certain program or connecting new equipment. Factors that contribute to Windows not working correctly are described below. You should study them carefully to begin correcting them.

Reasons for the Stop error

Both users of the new and advanced Windows 10 operating system, as well as fans of the older, but at the same time stable working “seven”, encounter problems such as memory management errors. The reasons for the error on both versions of Windows are largely the same. This could be a trivial malicious file that inadvertently went unnoticed by the antivirus, or serious hardware failures. Based on a range of factors, the approach to treating a personal computer must be comprehensive. Let's take a closer look at what moments precede the problem with code 0x0000001a.

On Windows 10

For Windows 10, the most common causes of memory management errors are the following:

1. Like many other blue screen warning signs, a memory management error is often associated with a conflict between a hardware driver and the operating system kernel. Perhaps BSoD began to pop up after connecting the peripherals. You should most likely update the driver to ensure the computer works correctly.
2. A recently updated driver may also fail. In this case, its new version does not meet the requirements of the operating system.
3. A rather banal, but obvious factor in problems with the operating system to this day is considered to be the presence of malware and viruses. Not always the installed antivirus can cope with this problem without user intervention.
4. Damaged system files do not allow the computer to work correctly and often cause a memory management error.
5. Failure of necessary equipment. This could be a damaged RAM, video card, hard drive or other PC components, without which its operation is impossible.
6. For the “ten”, such problems are typical if the BIOS used is outdated.

Most often, BSoD memory management on Windows 10 occurs for similar reasons as Windows 8, so treatment recommendations for both versions are very similar.

On Windows 7

A blue screen with error code x0000001a on Windows 7 can appear either due to the above factors, or for reasons more typical for the “seven”, among which additionally include:

1. Insufficient RAM, which, in fact, directly characterizes the problem.
2. Excessive processor heating.
3. A crowded registry that needs to be cleared of unnecessary information.

Based on all the above factors, you can build a confident troubleshooting algorithm. It is quite difficult for a person who does not have relevant experience in “treating” a personal computer to determine the exact cause at first glance. Moreover, not every specialist is able to do this. The approach to correcting an error must be comprehensive. Roughly speaking, by trial and error, you can achieve positive results if you follow the right recommendations.

How to fix error 0x0000001a memory management

As a rule, the “blue screen of death” using a code indicates why a personal computer is not able to work correctly. Not all users have the special knowledge to perform corrections according to a specific reason encrypted in hexadecimal code. But if you know the possible factors causing the problem, it is easy to fix it, since each of them can be tried to be eliminated separately.

Fix for Windows 10

1. If, after connecting new equipment, a memory management error begins to appear on Windows 10, then the solution to the problem lies in a new device. You can verify this by disconnecting the device from the computer. If the blue screen has disappeared, then the reason lies in a mismatch between the device driver and the OS kernel. You need to update the driver or wait for the update to come out if it is not yet available. If several devices were connected to the computer at the same time, you need to disconnect them one by one to determine which of them led to the conflict.
2. Some control file updates are not compatible with Windows 10. Their automatic updating often leads to a system conflict. It is necessary to roll back the driver to an older version if we know which software is incompatible with this version of Windows. This can be done by opening Device Manager using the Win+R key combination. As a rule, the operating system is interested in why we need to roll back a certain driver. You should check the box next to “The previous version of the driver was more reliable.”
3. Memory management error code x0000001a on Windows 10 may appear due to a virus. Even if you have a reliable antivirus installed, some malware is able to bypass it. It is best to scan your computer manually with a valid antivirus or using the CureIT! from the developers of Dr.Web.
4. Viruses were found and destroyed, but the problem was not solved - this often happens if malicious programs managed to inherit and damage some files. You can find damaged files and restore them using the SFC utility. To do this, use the Win+X key combination to call up a menu in which we click on the “Command Prompt” line. In the window that appears, enter exe /scannow, after which the scan begins. The program will detect incorrect files; the main thing is not to forget to restart the computer after the operation is completed.
5. Any faulty hardware can cause a memory management error. Most often, RAM suffers. If there are several OP lines, it is necessary to determine which of them is faulty. To do this, you need to remove the petals one by one from the system unit or the corresponding compartment at the bottom of the laptop. If there is only one line, you can try cleaning the contacts. When this does not help, the RAM will have to be replaced. If any other device is faulty: video card, hard drive, motherboard, then after replacement the error will no longer appear.
6. An outdated BIOS needs to be updated to get your PC working properly again. When rebooting, you should enter the BIOS menu and find out information about the current version and manufacturer. After this, you need to go to the developer’s website, download a more modern version and install it on your computer.

Fix for Windows 7

1. To eliminate bsod memory management, which arose due to insufficient RAM, you need to add an additional line of RAM. Otherwise, it will be impossible to run a heavy program or work with several at once.
2. Heavy programs make your PC work harder and generate heat. Sometimes this is what precedes various problems. You can try to disassemble the system unit, clean the components from dust, thoroughly clean the CPU cooler and replace the thermal paste on the processor.
3. The CCleaner program will help you deal with garbage in the Registry. You should set the “Search for Problem” command in the Registry tab. After troubleshooting, you need to restart your computer.

Regular updates, checking your PC for viruses, and cleaning the system unit will to some extent help avoid malfunctions, but not everything depends on the user. Iron wears out from long-term use and requires replacement and restoration. In addition, each new version of the OS and software requires more advanced additional parameters, thanks to which the computer will work faster in multitasking mode, avoiding conflicts with modern programs.

Conclusion

As has already become clear, a computer launching a BSoD with a memory_management error directs our attention to the memory problem, so the primary diagnostic method here is to check the serviceability of the RAM and hard drive. However, other factors also cause the Windows operating system of different versions to sound the alarm about a malfunction. It is important to know what reasons precede this in order to easily eliminate the error.

With the advent of the Windows 10 operating system software on the market, every computer user who switched to a new version of a Microsoft product left behind “a piece of themselves”, abandoning the familiar and beloved “blue screen of death” (aka critical error, aka “BSOD”) "). Agree that in previous versions of Windows, the output of information about the appearance of a critical error was much more motivating, since the bright blue background and a lot of “books” really inspired shock and awe in users, fully fulfilling the working/folk nickname “blue screen of death”. It gives me goosebumps.

Such romance disappeared with the advent of Windows 10, since instead of the usual “BSOD” design, users are presented with information on a calm blue background, with a large sad smiley face and minimal information.

But this does not make the criticality any less significant. Finding the causes of the error remains the key to solving it. And within the framework of this article, one of the problems of the new operating system, which is assigned the stop code “Memory_Management” or “0x0000001A”, will be analyzed.

Causes

The appearance of a critical error is always the result of some long-term or short-term targeted impact on the operating system.

That is why determining the cause-and-effect relationship is the main task that is set for each user who encounters a critical error.

If most of the representatives of “BSOD” neutralize all user attempts to log into the system, then “Memory_Management” manifests itself in this way extremely rarely, which both makes it easier and more difficult to solve the problem. And that's why.

If we turn to the literal translation, then “Memory_Management” means “Memory Manager/Memory Management”, which can already give rise to certain thoughts and ideas regarding the reasons for its manifestation.

Taking into account existing practice and Microsoft recommendations, five main reasons should be identified that can lead (and do, as has been observed in practice) to the appearance of the error in question, namely: (special attention should be paid to points “1” and “2”)

1. “The operating system contains a software driver that is unstable”;
2. “The computer’s hard drive is failing or contains errors/bad sectors”;
3. “The correct operation of the operating system was pressured by virus software”;
4. “The error is a consequence of a conflict formed as a result of software incompatibility, or as a result of their incorrect installation.”

It is worth noting that the above reasons also apply to other similar errors, united by a single reason:

• "video memory management internal";
• "attempted write to readonly";
• "attempted execute of noexecute".

And, therefore, everything that will be said above applies to them.

Solution

If you are one of those who, faced with the “Memory_Management” error, can boot to the desktop, at least in safe mode, then before proceeding with the options described above, you should take the time to create a restore point.

You can do this as follows:

We wrote more about how to create a restore point in the article: How to create a Windows 10 system image

Now having this “insurance” you should proceed to confirm the presence of the reasons indicated above.

As has been said many times before, drivers along with dynamic link library (.dll) files are most susceptible to various failures.

Therefore, the first thing you should pay attention to is checking the correctness of the operating system drivers used.

To do this, do the following:

Please note that this check will run automatically until it is disabled. But if, as a result of the check, errors are found that prevent entry, the system may issue a “BSOD” and go into a cyclic reboot, which will continue indefinitely.

If in your case the situation develops this way, then during the next Windows startup, constantly press the “F8” key and then:

An alternative option is to use a previously created restore point to roll back the system configuration before activating driver verification.

The to-do list doesn't end there. The disabled diagnostic utility, upon its operation, created a specific file, which is located in the “C:\windows\minidump” folder. It contains a direct indication of drivers that have any errors in their structure.

You can also open a file with a similar format using the operating system using the official Debugging Tools for Windows utility, which is available for download on the official Microsoft website, but the information displayed will be difficult to understand.

Therefore, the best option would be to use third-party specialized software, for example, BlueScreenView. The program will recognize the memory dump file and display the information in the most understandable interpretation possible, highlighting the faulty driver in pink.

All that remains is to remove the “culprit” and manually update/install it by downloading it from the official website of the developers.

Checking RAM

It’s worth noting right away that testing the correct operation of RAM takes a long time, during which it is not always possible to ensure uninterrupted diagnostics.

Therefore, if you are not ready to spend 3-4 hours (on average) checking the operation of the RAM, proceed immediately to the next step. For testing, you can use both standard tools and specialized software.

To start:

After clicking the button, the window will close, save all open documents and restart your computer. The diagnostic utility will automatically start scanning when the operating system starts.

In addition to this test, you can use the Memtest86 program, which has long been recognized as a leader in this software category.

After downloading and burning the program onto bootable media, do the following:

The check is cyclical and will continue until you complete it yourself. But it is necessary to take into account that a complete check of even one stick of RAM can take about 5-7 hours, so the best option would be to leave the computer with the program running overnight.

All errors found in RAM operation will be marked in bright red, leaving no chance of missing them.

The further course of action depends on the number and content of errors, for example, removing the RAM sticks and cleaning the contacts, or actually replacing the RAM.

Checking the hard drive

Checking the correct operation of the hard drive is carried out in a similar two-step manner.

First stage:

The scan time will depend on the disk size and speed. Upon completion of the test, you will be provided with a report indicating whether there were any problems, as well as instructions on how to proceed.

As a third-party software, you should select the “Victoria” utility, which is available for free download on the website http://hdd.by/victoria/.

Scan your hard drive or solid state drive and decrypt the information. Unfortunately, it is impossible to identify specific recommendations at this stage, since this issue is purely individual, and it is from the results of implementing “SMART” that further actions will be determined. For example, the general impression of “Bad” from Victoria suggests that it’s time to think about replacing the HDD or SSD.

Checking for viruses and software incompatibilities

As already mentioned at the beginning of this article, the error in question may be a consequence of virus software, or a conflict between installed applications. We wrote

Therefore, conduct a full scan of Windows with any available anti-virus utilities, and compare the overall picture of your recent actions with the operating system. For example, when and how the application/utility/game/update, etc. was downloaded and installed.

That is, to determine that very “cause-and-effect relationship”. And everything that theoretically could interfere with the correct operation of Windows should be removed.

Conclusion

As a final recommendation, if the above steps do not solve your problem, you should check for BIOS updates. In a number of cases, installing the latest BIOS firmware restored the functionality of the operating system in this and similar errors.

Users of the Windows operating system often encounter blue screen of death errors. One such error in Windows 10 is Memory Management. Read this article on how to return the operating system to working condition.

What is this error?

Memory Management - an error, which indicates a conflict between hardware and software in memory. It may appear while the OS is running or immediately upon boot.

Causes

The malfunction appears for the following reasons:

1. Driver conflict or malfunction.
2. Malfunction of the RAM stick.
3. Hard drive malfunction.
4. Outdated BIOS version.
5. Activation of virus software.
6. Incorrect power settings.

How to fix?

Before starting work, I strongly recommend creating an OS restore point. Also, before following the instructions, please read them all the way through first.

Identifying and fixing the problematic driver

First, you need to find out which of the drivers loaded into memory caused the blue screen of death error:

1. Enter Safe Mode. This will help avoid further mistakes.
2. Enter verifier in the search bar
3. In the Driver Validation Manager that opens, select “Create custom settings (for program code)” and click “Next.”
   
4. Select the following test types:
   
5. Then check the box next to “Select driver name” from the list and click “Next”.
   
6. Sort the drivers by the "Vendor" column and select all except Microsoft Corporation. Click "Done".
   
7. Reboot your computer to start the data collection analysis procedure.

Important! When checking, the system will display a blue screen with an error if it detects a violation when loading the PC. The operating system will reboot cyclically and will not allow you to log in.

If an error occurs, don't panic. After 2 unsuccessful attempts to boot the OS in a row, “Diagnostics” will start. If this does not happen, use a bootable USB flash drive to go to “Advanced options”.

Go to Diagnostics → Advanced Options → Startup Repair → click Restart and select Safe Mode with Command Prompt.

In the command line that opens, write:

• disabling verifier /reset
• reboot the computer in stationary mode shutdown -r -t 0

Advice! If a restore point is created, you can simply roll back to the operating state of the OS. Go to "Advanced options" → "System Restore" (using a restore point) and select a saved point to roll back.

Now you need to open the file with the scan results. It is located at: C:\windows\minidump

Use the program. Open a crash dump to analyze the failed driver. It is highlighted in pink.

Based on the file name, use Internet search engines to determine which driver it belongs to. For example, NETwew01.sys refers to the Intel Wireless WiFi Link Driver.

The driver that failed needs to be reinstalled manually using Device Manager. Look for the driver you need on the official websites of the developers.

Advice! If within 24 hours after starting the check there are no more blue screens, the problem is not in the driver.

Hardware problem

A BSoD error is possible when the hardware is faulty. Analyze the hardware for errors:

Important! It is possible that a BSoD error was triggered by malware. Scan your system with free virus detection solutions Dr.Web CureIt! or Kaspersky Virus Removal Tool.

If you have a question while reading the article, write it in the comments or use the feedback form. Users of Microsoft products and the resource administration will try to help you.

It looks like a terrible, but completely curable mistake. It's scary because it causes a blue screen. And it is curable, because there are several solutions that can help get rid of it.

As a rule, after taking the measures described below, there is no need to reinstall Windows 10.

MEMORY MANAGMENT WINDOWS 10 - error and its causes.

There are several main reasons why the unfortunate death screen appears. Here are the most common ones:

• Problem with newly installed hardware;
• The recently updated driver failed;
• A virus or malicious utility in the memory;
• Damage to system files by a virus or malicious utility;
• Problem with old equipment;

Below we will try to save you from the error MEMORY MANAGEMENT, following the steps sequentially. All that is required of you is attentiveness and accuracy.

All actions. What you do on Windows and your computer is done at your own risk, and only you and no one else is responsible.

1.0 Problem with newly installed hardware

Everything is simple here. If you have recently installed new equipment into the system unit or connected via any interface, The best solution would be to disconnect the recently connected device.

If the error reappears, proceed to the next step. But if it disappears, the driver of this very equipment is most likely to blame. It needs to be updated. You will find out how to do this below.

1.1 What to do if there are several new devices?

In this case, disconnect one device at a time, each time after MEMORY_MANAGMENT Windows 10 errors. This way you will gradually identify the device that is generating a failure.

2.0 If you have recently updated the driver

If you recently updated the driver for your video card, USB device, or sound card, it is quite possible that the new driver was the cause of the failure.

In this case (of course, if you know the updated driver), you should try to roll back the driver, i.e. return it to its previous version. This can be done via device Manager. Getting into it is simple: press the keyboard shortcut + and paste the following line into the window that opens after copying it from here:

mmc devmgmt.msc

Click or .

Will open device Manager. Find and right-click on the device whose driver you updated, and in the drop-down menu click Properties.

Switch to tab Driver. Please note the driver version and date. This will help compare versions after the rollback.

There are several buttons in the same window: <Сведения> , <Обновить> , <Откатить> , <Удалить> , <Отключить> . We need a button just a button <Откатить> , which we will press.

As soon as you press the button <Да> , active activity will begin on the computer. A couple of times the computer may seem to freeze (depending on the driver). Just wait a little and everything will be restored.

Advertising

You will have no way of knowing that the rollback has taken place. The only sign that everything is over will be the calm state of the computer.

Now, if you look again at the driver version and date, you can see that they have changed to an earlier one.

Observe the condition of the computer. If the error stops bothering you, then everything went well.

2.1 What to do if you need a new driver?

You should wait until a new driver version for your equipment is released. If the next driver version is not expected, contact your equipment manufacturer for a solution. If the hardware is old, you will most likely receive a response that it is not compatible with Windows 10.

3.0 If you haven’t updated anything, but you’re haunted by a Memory Management error

If in the previous example the culprit was the new driver, then in this, we will make the culprit outdated. Therefore, if we rolled back the driver, now we need to update it.

3.1 Which driver needs to be updated?

Many reputable sites tell you how to identify a faulty driver using effective but complex actions, and thereby “hit the bull’s eye.” We will take simpler steps and fire small shot at the “sparrows”, trying to catch them all at once. That is, we will update everything.

You can update drivers one by one ad infinitum, but still not catch the faulty one. It will be much more effective to use the so-called “driver pack”. A driver pack is a set of the latest drivers collected in one package. Often with automatic installation.

Supporters of “clean installation” of drivers very often criticize such packages for driver instability, for modified versions of drivers, for viruses contained in the package, and similar shortcomings. They criticize for a reason. All of the above took place a few years ago.

Now driver packs are programs that have reached a completely new level. Continuous work is underway on them, and shortcomings are eliminated. Shortcomings and bugs in the official drivers of manufacturers are also eliminated.

Run the downloaded file. This online version package. Its difference from a full-fledged one is that it downloads only the necessary drivers during installation.

As soon as the program checks the hardware configuration, you will be prompted to install everything automatically. In this mode, not only drivers will be installed, but also many related programs. Review the list of installed software.

If this arrangement does not suit you, find the button at the bottom of the window <Режим эксперта> and press it. This will allow you to configure everything yourself.

Switch to the tab for selecting software to install, uncheck the boxes that you do not want to install.

Then switch back to the driver settings tab and start the installation.

This method affects and updates almost all drivers. Therefore, the chance that the faulty driver has been replaced is very high. After updating, restart your computer.

This driver pack is far from the only one. You can use any.

4.0 Actions of viruses and malware.

There is a possibility that, along with programs, viruses coexist on your computer. They may also cause a blue screen MEMORY MANAGMENT.

Even if you have an antivirus installed, a full scan of your computer using auxiliary tools will not hurt.

Check the system with two utilities - Dr.Web CureIT! and Malwarebytes.

The full process of testing and treatment cannot be covered in a whole article. We also recommend that you read the article ““. It contains a lot of useful information.

5.0 Corruption of system files

If viruses have already managed to visit your computer, there is a possibility that as a result of their activity, system files could be damaged.

To check and restore these files, you need to use the SFC utility.

Click + and the drop-down menu, click the item Command Line (Administrator).

A window will open Command line, in which we enter the following line and click :

sfc.exe /scannow

After scanning, the sfc utility will tell you whether damaged files were found. After scanning, be sure to restart your computer.

6.0 Faulty equipment

And another possible reason for this error to appear is faulty (not working properly) equipment.

Anything can be attributed to this item - a malfunction of the hard drive, RAM, sound card, motherboard, video adapter, in fact, almost everything.

All this equipment requires careful inspection. The process is quite complex and results may vary. Some equipment defects can be corrected without replacement, while others cannot. You can read more about equipment diagnostics and information in the article of the same name.

We hope this note helped you get rid of Memory Managment in Windows 10.

P.S. If all the methods described above were ineffective, write about it in the comments and we will tell you how to find out in detail which driver failed.