What is local disk f on a laptop. Hard disk partitioning (FDISK)


For normal operation hard drive needs to have a partition table (sometimes called partition although strictly speaking partition- these are the disk partitions themselves). If it is absent, the operating system does not have access to the hard drive (“does not see” the hard drive). The partition table contains information about the physical characteristics of the disk: the number of sides, the number of tracks and sectors per track, as well as information about partitions and logical drives.

Disk partitions

When working in MS-DOS system Each hard drive can have the following partitions:

  • Primary DOS partition: required. This section forms the only system logical drive(usually having the name C:)
  • Extended DOS partition: present only when the hard drive has two or more logical drives.
  • Non-DOS partition: formed if you work with two or more operating systems. This partition is given to other operating systems for use and is invisible to MS-DOS.

FDISK Team

To execute this command, you must have a boot floppy disk made in Windows 98SE, preferably in Russian. Although it comes bundled with the operating system external team FDISK, but in English.

After booting the computer from the floppy disk, enter the command

The main menu will appear on the screen:

FDISK Options
(
FDISK options)
Current fixed disk drive: 1
(Current hard drive disk: 1)
Choose one of the following:
(
Choose one of the options :)
1.Create DOS partition or Logical DOS Drive
(
1. Create a DOS partition or DOS logical drive.)
2.Set active partition
(
2. Install active section.)
3.Delete partition or Logical DOS Drive
(
3. Delete a DOS partition or logical drive.)
4.Display partition information
(
4. View partition information.)
5.Change current fixed disk drive
(5. Change current drive hard drive.)
Enter choice:
(Enter your choice:)
Press Esc to exit FDISK
(Press Esc to exit)

Note: If there is only one hard drive installed in the computer, then option 5 is not issued.

Hard drive partitioning

To partition a hard drive, you must perform the following operations:

  • Make the reconfigurable drive active (if necessary)
  • Delete all existing partitions on the hard drive.
  • Create new sections you need.
  • If necessary, create logical drives.
  • If necessary, assign an active partition (it will boot from)
  • Format the resulting logical drives.

Removing existing partitions

If your disk has already been configured, you will first have to remove the previous partition. To do this, select item 3 of the main menu. The following will appear on the screen:

Delete DOS Partition or Logical DOS Drive
(Removing DOS partitions or logical drives)
Current fixed disk drive: 1
(Current drive: 1)
Choose one of the following:
(Choose one of the options:)
1. Delete Primary DOS Partition
(1. Delete primary DOS partition)
2. Delete Extended DOS Partition
(2. Delete extended DOS partition)
3. Delete Logical DOS Drive(s) in the Extended DOS
(3. Remove logical drives from extended DOS partition)
4. Delete Non-DOS Partition
(4. Delete non-DOS partition)

The order of your actions:

  • Delete the non-DOS partition (if it exists)
  • Remove logical drives from the extended DOS partition (if this partition exists), and when deleting you will need to confirm your intentions several times and enter the drive label.
  • Delete the extended DOS partition itself (if you had one), and when deleting you will need to confirm your intentions several times.
  • Delete the primary DOS partition, and when deleting you will need to confirm your intentions several times and enter the disk label.

Now the previous split is deleted and you can create a new one.

Create a new split

After deleting the previous partition, you need to create a new one. To do this, select option 1 from the main menu.

Create DOS partition or Logical DOS Drive
(Creating DOS partitions or logical drives)
Current fixed disk drive: 1
(Current drive: 1)
Choose one of the following:
(Choose one of the options:)
1. Create Primary DOS Partition
(1. Create a primary DOS partition)
2. Create Extended DOS Partition
(2. Create an extended DOS partition)
3. Create Logical DOS Drive(s) in Extended DOS Partition
(3. Create logical drives in the extended DOS partition)

First you need to create a primary DOS partition. Select option 1. You will be asked the question:

Do you wish to use the maximum available size for a Primary DOS Partition and make the partition active
(Y/N...............?
(Do you want to use all disk space for the primary DOS partition and make this partition active?)
If you answer yes, then one logical disk will be created on your entire hard drive, from which the operating system will be loaded.
In this case, the hard drive partitioning is complete. If you want to split your hard drive into several logical ones, then you must answer in the negative. The following request will be displayed on the screen:

Enter partition size in Mbytes or percent of disk space (%) to create a Primary DOS Partition.................:
(Enter the size of the primary DOS partition in MB or as a percentage of disk space.)
After you create the primary partition, you will need to create an extended DOS partition.( Create Extended DOS Partition)

A message will appear on the screen:

Enter partition size in Mbytes or percent of disk space (%) to create an Extended DOS Partition.........:
(Enter the size of the extended DOS partition in MB or as a percentage of disk space.)
If you do not need to leave space for working with another operating system (not MS-DOS), then you must specify all the disk space remaining free, which is what is offered by default.
After you have created an extended DOS partition, you need to split it into logical drives.( Create Logical DOS Drive(s) in Extended DOS Partition)
Enter Logical drive size in Mbytes or percent of disk space (%)...
(Enter the logical disk size in MB or percentage of disk space.)
If you want to create two logical ones (one is the primary DOS partition, the other is the full size of the extended DOS partition), then you need to accept the default one maximum size. Otherwise, enter your size and repeat this operation for the next logical drive.

After dividing the hard drive into partitions and logical drives, you need to install the active partition (the computer will boot from it).

Setting the active partition

To boot from a hard drive, the primary DOS partition must be active. Select option 2 from the main menu and enter the partition number from which you will boot:

Enter the number of the partition you want to make active......:
(Enter the partition number you want to make active)

When partition information is displayed, the active partition is marked with the letter A.

After completing these steps, partitioning the hard drive is complete. All that remains is to format the resulting logical drives.

Note: If none of the partitions are made active, then it is impossible to boot from the hard drive. In this case, no messages are displayed.

Formatting the hard drive

Formatting a hard drive has some features. First, drive C: must be made system.

Secondly, you will have to format the hard drive after booting from a floppy disk. After booting from the floppy disk, enter the command:

A warning will be displayed on the screen that you are formatting the hard drive:

Warning: all data on non-removable disk
Drive D: will be lost!

A follow-up question will be asked:

If your answer is positive, the hard drive will be formatted and the operating system will be transferred to it.

After this, you can boot from the hard drive and transfer the files you need to it ( operating system), and, if necessary, format the remaining logical drives (the S parameter, of course, no longer needs to be specified). The process of reconfiguring the hard drive is completely completed.

The most important icons are the icons Local disks . Let's talk about this.

Local disk icons

If you ignore most of the icons, then in the center and at the top of the page, you will see an icon called Local Drives. They are the ones that interest us (for now).




Imagine that your computer is your apartment, and each separate Local disk is a separate room in this apartment.

If you have only one local disk, then this is a one-room apartment (computer). Nobody says that living in a one-room apartment is bad (if only there was somewhere to live!).



But each of us wants to be in a separate room, which means it’s better to have several Local Disks.

Let's figure out what Local Disks are for and how they are used.

L local drive C

Local drive C there is always one, and for absolutely everyone. If you open this icon, you will see a certain number of folders with names in English.

These folders contain other subfolders system files and folders. All this beauty is “responsible” for the entire operation of the computer. This - operating room Windows system . It is like the Head or Brain of a computer.



If we make any changes to Local Disk C, or break anything, our computer may even fail.


It’s better to scare you at the very beginning than to let you feel like a full-fledged owner of the computer, who is allowed to do everything.

Better " do not touch» nothing on Local Drive C, or don’t go there at all! Well, at least until you have learned to confidently use a computer.

Now you nothing to do there!

L local drive D

On at this stage your knowledge, you should be interested in other Local drives. Now close the window and open My Computer again.

On Local drive D all Additional Information: video and music, various documents or regular photographs. In other words, everything that you yourself placed there or intend to put in the future.

If you have only one Local Disk (hard drive), it is better to divide into at least two parts. But don't do it on one's own!

Let an experienced user or technician help you.

This problem is very easily solved! Along with this, you can use .


HOW TO CREATE A LOCAL DISK

Watch the video to the end, and only then start trying when you are sure that you understand the sequence of all the steps taken.



Additional Local Disks

Now please open any Local disk, except Local disk C (where the OS is located).

Perhaps there is nothing there yet if you bought it not so long ago. And if you used a computer, then there are many files and folders on the disks with some information.

Naturally, here we can already carry out some operations without fear of further consequences. By at least, at least the system will not suffer. So, you can experiment!

In the future, you will store information on Local Disk D or E (if you have one).

Desktop

Many people store information in the “My Documents” folder or on the (screen) Desktop. They don't even realize how big a mistake this is!

Let's hope you are not one of those. If this is not the case, then do not make this mistake.

Now close everything open windows. Look at the Desktop (screen). Don’t pay attention to the labels (we’ll talk about them later), this is where they belong, in most cases.

You look at the folders, at the files without arrows and remember one strong rule - they are here MUST NOT BE!

The best place for them is Local Drive D, E, or another drive other than Local Drive C.



My Documents folder

Now about the “My Documents” folder. It can be seen after clicking the “Start” button or directly on the Desktop.

If the folders My Pictures, My Music, My Videos are empty or almost empty, then this is a good sign, which means you are fine.

But if there is a lot in this folder different files, folders, and all sorts of information, then be sure to transfer them to another Local disk.

In fact, the contents of the Desktop and the “My Documents” folder are also located on Local Drive C(same as the Windows Operating System).

If something happens to the computer, then all the contents of the “My Documents” folder and the Desktop will simply be destroyed.

Now, you thought that nothing would happen to you. I thought so too, however...

I wish you that everything will always be good for you!

Another argument in favor of transferring unnecessary information is the fact that the computer may start to work slower or will often “.

It’s better not to take risks and experiment, but “transfer” all important information and all folders and files that are important to you to any other drive except Local Drive C.


The local disk is the place where we will store all important information.

There are many different icons, buttons and inscriptions on the computer. Some of them we use (or will use), and some we will never need. You will learn about all these icons and buttons in the following lessons. And in this lesson we will talk about the most important icons on the computer - Local Disks.

Open My Computer. This icon may also be called “Computer”. It is located either on the Desktop, that is, on the screen, or in the “Start” button.

When you open “My Computer,” you will see several icons in the center of the window. We will talk about most of these icons in the lesson “How to open a disk and flash drive”. Now we are interested in the icons called “Local Disks”. There is always at least one such disk in the computer, but there may be more. Most often, there are two of them.

A local disk is a section of a computer in which all information on the computer (videos, music, documents, photos) is stored. You can compare it to a room in an apartment. If there is only one local disk, then we can say that you have a one-room computer.

It is best when the computer has two or three local disks. Now we will try to figure out why they are needed and what they are used for.

There is always one local disk. It is called “Local Disk C”. Open this icon and you will see several folders with English names.

Inside these folders are other strange folders and files. They are “responsible” for the operation of the computer. That is, these folders and files are computer system or, as it is also called, the Windows operating system.

If you and I break something here - we delete some folder or file, change the name - then the computer may fail. Therefore, it is better not to “touch” anything in drive C. It's best not to go into it at all. At least until we learn to use a computer fluently.

We are more interested in other Local disks. Close the window and open My Computer again.

If you only have one Local Disk, then this is not very good. It is advisable to divide it into several parts. True, it’s better not to do this yourself. Invite a computer geek or computer technician you know.

And other drives are the most important computer icons. In them we will store all our information - books, music, photos and pictures, documents and so on.

Open some drive (D or E). If you recently bought a computer, then most likely there will be nothing in it. But if you used the computer, then Local Disks will contain files and folders with information. You can “walk” through these files and folders. Let me remind you once again: we will store all our information in Local Disks. This applies to drive D and any others except C (the system is located there, and we have nothing to do there).

Many people unknowingly store their information in “My Documents” and on the Desktop (on the screen). This is a big mistake. Let's check how things are going on your computer. Close all open windows. Look at what is on your Desktop (on the screen). Ignore the folders and files with arrows. They are called shortcuts and are not of interest to us yet. See if there are folders and files without arrows. They should not be on the Desktop; they should be in Local Drive D or any other drive other than Drive C.

You can learn how to transfer files and folders to Local drives from the lesson “Copying"

Also open "My Documents". This icon is located on the Desktop or in the Start button.

If there are several folders, for example, “My Pictures”, “My Music”, “My Videos”, and these folders are empty or almost empty, then everything is fine. But if there are a lot of files and folders in My Documents, and you know what is in them important information, then you will need to transfer them to Local disks (D or E).

The fact is that the Desktop, as well as the “My Documents” folder, are actually located in drive C. That is, where we have the Windows operating system. And if suddenly something happens to the computer, for example, the system becomes corrupted or a virus gets in, there is a high probability that everything from “My Documents” and from the Desktop will be erased. And in addition, Local Disk C may become full, and the computer will start to work very slowly or stop working altogether.

It’s better not to take another risk and “put” all important folders and files into drive D or any other Local drive except C.

Question: An unknown disk has appeared: F


Guys, an incomprehensible disk appeared in my “This computer” tab: F. there is no access to it. disk optimization, disk management, diskpart do not see it. Maybe this is a home group, I looked at how to create it, got to the password, and quit.? from home group came out, but the disc was not lost.

Added after 6 minutes
disk 100MB FAT32

Answer: and this unsolvable problem?

Added after 17 minutes
Thx solved the problem! After leaving the home group, I had to reboot the laptop, at that time I couldn’t, I overwritten it free place on hard. Thank you for wanting to help

Question: Error 0x0000007B after repartitioning the hard drive


Hello, when I boot up my computer I get error 0x0000007B. After what did she appear? My hard drive was divided into two partitions - C: and D:. On C: there is Windows 7, on D: a lot of memory is occupied, although I measured the files, and their volume occupied much less than what is written in the properties. More than 100 GB were occupied to nowhere. I decided to create new section, transfer everything you need there, and format it. Compacting the volume freed up 60 GB, I created new volume and transferred some of the necessary files there. The volume was no longer compressed, it said that 0 MB was free for compression, although it also seemed like about 100 GB was free. I read that it will cope with all problems Acronis Disk Director. I installed it, started to free up space, he asked me to reboot the computer, after the reboot nothing changed. I installed Paragon Partition Manager, there was some kind of error, so I downloaded another version, installed it, and remembered that the old one needed to be removed. I started deleting, I thought I was deleting new version, and canceled the deletion, after which everything became dull, programs began to disappear, a black screen remained, and then an error appeared. Now when the system is restarted it always appears. Startup restore doesn't help. Restoring from a restore point gives an error, latest configuration The system doesn't help either. Even when I select recovery, when I select the operating system, it loads and then asks me to select an operating system, although there is none in the table.
Will it be possible to restore the system startup without deleting the necessary files? If not, then I can still delete it, have it on another computer, it just takes a very long time to transfer, and I’m not sure that everything is there.
Sorry for the quality of the photos, they were not taken for the topic, I’m sitting with Dr. Web Live USB.
If necessary, I’ll post the AIDA64 report, but I need to reboot.
Thank you in advance!

Answer:

Message from 20BaLeN02

"I booted from a flash drive with Windows PE on it, opened iso file Windows, which was on another flash drive, clicked on setup.exe, selected full installation, after which an error began to appear when loading from the hard drive"

Why is this so? There are normal ones standard methods: from DVD, Internet or bootable flash drive, but not like that.
When installing and formatting as needed.
According to your SMART, I just took a quick look: there are errors, they seem to be uncritical, but I’ll review them later.

If you perform all the actions this way - incorrectly, in your own way, then the problems will not disappear. Maybe you have someone who can help, someone who is good at computers?

What error is coming out now, is it the same? If it's different, show me.

Question: Missing disks


There is an old server running Windows 2003, with three mirrored RAID arrays built on it (the system has three logical drives).

A week ago, one logical drive disappeared from the system. After a reboot it appeared back. In the system logs for this day and the previous one there were a bunch of warnings from dmio that it was not possible to write to disk. Periodically, a message appeared that the disk was suddenly ejected.

The next day the disk was in the system, but after a reboot it disappeared. Subsequent reboots did not lead to anything - the disk did not appear.

The next day he appeared again. Disk Manager showed the status "Good (at risk)" (in previous days Disk Manager did not start). Moreover, surprisingly, both physical disks were shown for this array, and the remaining two arrays were shown as ordinary physical disks (one array - one disk). For the problematic array, the manager showed the type "Mirrored Volume", and for the rest, "Primary Partition".

After executing the reactivation in the manager, synchronization started and the volume entered the "Good" state. The next day the volume disappeared again.

The disk configuration is quite tricky. The motherboard has a built-in RAID controller. There are two Seagates of 80 gig each hanging on it. The system is located on these disks.

An external 4-port RAID controller Silicon 24XX is plugged into the PCI slot (I don’t remember the last two digits now). There are two WD 500 gigs on it.

To slot PCI Express A 2-port Silicon 3132 RAID controller is plugged in and there are two 320 gig Seagates on it.

Information about why everything works in this particular configuration has been lost for years.

Strangeness number one - this 3132 is not visible anywhere during boot and there are no invitations to enter its BIOS. Therefore, it works, in fact, like a normal one SATA controller, And his RAID array organized using Windows. If you go into the motherboard's BIOS and select boot priority, there will be four elements: built-in RAID, Sil24XX and two separate disks hanging on Sil3132.

Next, when the volume disappeared, an attempt was made to transfer the disks from two-port silicone to 4-port. They didn’t appear in the disk manager and AIDA didn’t see them either (I didn’t think to go into the controller’s BIOS). After this, the disks were rearranged.

The disks appeared in the system when I reconnected the IDE-SATA power adapter to the other tail. Thinking that the power supply was to blame for everything, I left the server to look at for another day

Let's call this configuration "control"

Today one of the disks began to make whistling sounds (like something clinging to the cooler). The intensity of the sounds was about once every 5 seconds. Sometimes stopping. At the same time, no manipulations were performed to access the disks. The server was running with the OS loaded. The system began to freeze, and then said that the disk was unexpectedly disconnected. In the process of searching for the source by sequentially disconnecting the disks, it was determined that this was one of the disks in the problematic array. But while they were looking, the second disk from this array stopped being detected.

The second disk appeared when the first connector, rather than the outermost connector of the adapter, was connected to it.

After looking at all this, I again restored the control configuration. Everything started working again without additional sounds.

Well, now the question is: who is to blame and how to diagnose it all?

I have three candidates:
1) RAID controller. But then why didn’t the disks appear when they were reconnected to another controller?
2) Disks. But then why do both disks disappear synchronously? It’s hard to believe that two disks have the same malfunction
3) BP. In principle, it should be enough. It's 420 watts. Consumption consists of 2 xeons of 110 watts each, 6 disks with a total peak consumption of 55 watts and two RAID controllers. And if the problem is in the power supply, then why do these two disks fall off and always in pairs?

Yes, I already read today that Silicone and Seagate are not friends, but it worked for years.

In general, I will be grateful for any diagnostic ideas.

Best regards, Vasilisk

Answer: I forgot to write. The problem was resolved by replacing the power supply

Question: Transferring information to another disk.


I got it from a friend unnecessary disk 100 Gig and thought about finding a use for it. Since the disk capacity is small, I decided to use it either for a second RAM or... in short, I thought about whether it was possible to free up disk C (thereby increasing disk D) and transfer all the information to separate disk. Hence the question arose whether this could be done and how to do it.

Answer: Mauritius

Of course, these are necessary questions. Since a free disk has appeared, I want to find a use for it.
And of course thanks for the advice.

Question: Hard drive disappears


The problems started after reinstalling windows7, before that hard disks worked fine. I didn’t change any settings, didn’t tinker with the hardware. After reinstalling Windows appeared local disk E (before that there were only C and D) and some information was copied to it from drive D. Windows moved to drive C, as planned. While working at the computer, it began to freeze and display a disk error on a black screen. It didn't show up in the BIOS. Turning the computer off and on helped. And all these dances were repeated for a month. Then I removed Windows, formatted the C drive and now I can’t install the operating system because the hard drive disappears before it is installed.
P.S. The computer has 2 hard drives.

Answer:

Question: The disk structure is damaged and cannot be read. How can I save valuable information from disk D?


no access to D: the disk structure is damaged, reading is impossible - this is the message I received when I tried to access D..... After the computer suddenly turned off.
The W.Digital320 hard drive is divided into 2 partitions: main C: 50GB and logical D: 260GB... so the D drive has disappeared!
RAW file system. capacity, occupied, free - these are all zeros.
HP is installed on C, which loads easily.
how can I save valuable information from D drive?

Question: Inexplicable system slowdowns, Acer laptop e5-573g


Acer e5-573g laptop
Pentium 3556
8gb ram
The system is based on an Intel 530 120Gb ssd. Branded Intel utility SSD toolbox says that the disk is fine.
Instead of the drive there is an SSHD ST500LM000 500Gb
Windows 10 Enterprise
Drivers are all updated to the latest versions.

Problem:
When opening my computer there was a delay in displaying content (about 3 seconds)

Initially, this laptop had a regular 1TB hard drive (not even sshd). After the purchase it was immediately replaced with an ssd. The terabyte unit fits into the drive slot. There were the wildest brakes when opening my computer (about 7-10 seconds), when opening drive D. Chrome started up for 10-12 seconds. The whole system was lagging. After replacing it with a 500 GB sshd it became better, but still worse than on the previous laptop (which had both an SSD and an SSD previously installed)

Help me understand what the problem is.
Either in the ten (the previous laptop had a seven), or in the disks, or in the integrated video card (which works when games are not running), or because the processor does not handle multitasking.
Betting seven is not an option because... bad people from Acer decided to release drivers only for Win 8 and Win 10. And on the seven without drivers it’s even worse than on the ten (tried it).
Linux is also a so-so option because... There is special software that is only available on Mac and Windows, but I don’t want to bother with emulators.

The previous laptop on the desktop worked perfectly, but it’s just very outdated, weighs a lot, has a dead battery, and so on. presentable appearance lost over the years of use.

Answer:

Message from Ironwatermelon

Updated again with clean wood for the video card

What about the chipset and the video core built into the processor?
Although, it is unlikely to help you - you will still sin by percentage.

Added after 36 minutes

Message from CoD - MW2

See Task Manager - which process is loading the processor. Here's another -

?????

Message from Ironwatermelon

When opening my computer there was a delay in displaying content (about 3 seconds)
Chrome opens in about 6-7 seconds. If you open a tab with a large number of photos, twitching appears when scrolling, and there is no smooth scrolling. If you run any game (even a completely undemanding one like darkest dungeon), it is impossible to listen to music because... the song starts to lag (if you alt-tab, then the lags go away).

In general, I thought this was normal for your weak processor!

Message from Ironwatermelon

In theory, will it be possible to change it on a beech tree or not at all?

I don't know, I haven't tried it. But I'm sure the cost will be decent. It's not worth it. Better system install Win 8.1 x64 and configure it correctly!

Question: How can I fix my hard drive (all the info is there)?


Hello. I have a laptop and it has a factory hard drive Hitachi IC25N060ATMR04-0. Problems have arisen: no windows are installed and strange stripes appear on the screen when starting up. What could be the problem? What are the solutions?

SMART disk

Drive Passport

Disk check MHDD program

Stripes on the screen

Answers like buy a new hard drive are not needed. There is no money. I won’t take it for repairs either.

Answer: I completely disassembled the hard drive and reassembled it, cleaned it of dust. I'm glad that it at least turned on, because I took it apart for the first time. It makes much less noise and is not so hot now. I installed Victoria's remap for the night. Let's see what happens.

Added after 10 minutes
It also started working a little faster.

Added after 18 hours 31 minutes
The computer worked, I installed Windows. But after a couple of hours it flew again

Question: I bought a used netbook, everything is fine with it, but it rattles a little, such strange sounds


Good day!
I'm far from a pro in hardware, so I ask HEEELP.
I bought a used netbook, everything is fine with it, but it rattles a little, such incomprehensible sounds. My old Hulett is 17 inches and it will be quieter.
The seller says that there may be problems with the cooler. but I’ve been reading your topic and thinking, “Or maybe a hard drive”?
I downloaded the program and tested it. Tell me from the pictures from the attachments (I thought I’d get old before I figured out how to load them)), what’s wrong with the disk?

Answer: Hello,

In principle, tapping and all kinds of clicks do not mean anything good. If the cause is the hard drive, it will subsequently lead to serious damage to the drive. But I see that the program did not give any errors. If you are 100% sure that the hard drive is knocking, then I would advise you to still try to test it again only using the utility from the manufacturer. And just in case there is important information on the disk, transfer it to another medium. Also make sure that the laptop cooling system is in good condition, try to remove dust from the processor heatsink and video card. Or better yet, just turn to specialists, they will quickly find exactly where the problem is and what needs to be done. I hope this was helpful, Citizen_WD

Question: C hard drive is there a problem?


Good night all.
Help me understand what my problem is. I apologize right away for writing a lot, but the problem worries me greatly.

This is the situation. I reinstalled Windows and at first everything was fine. But then the first freezes appeared. Then I decided to go to the Task Manager and see what the problem was. The hard drive was loaded at 100%, but besides this, the “Average response time” of the disk was either 30-50 ms, then suddenly from 2 to 20 thousand ms.
Then I decided that the disc was over. But I checked it with a couple of programs, and SMART was fine everywhere. I decided to connect another drive. But the same problem appeared there.
Then I decided to try the last option. I got it almost new HDD from from a laptop. I measured the response time in advance, which did not rise above 30-40 ms. But there was a problem with the computer too.
So, besides, after returning it to the laptop, it began to load much longer, and the response often became 50 ms, and sometimes 200 ms.
There were also side effects.

Initially, I connected the drives with the computer turned off, but did not unplug the power cord and did not turn off the power supply using the button on it. And the first time I connected any hard drive, the computer simply shut down when loading the Windows logo. But on subsequent Windows downloads there was no such problem.

Then I thought, maybe it’s worth completely disconnecting the power supply from the power supply. I turned it off with the button on it. Next clicked POWER button to get rid of the remaining electricity in the computer. And after that I inserted the SATA cable. But then I went nuts, the computer simply refused to turn on, no matter how hard I pressed the power button. At the same time, if you leave it for a few minutes after connecting the disk in this way, it turns on successfully and there are no problems with further starts.

At the same time, when changing SATA connector The problem with the first start remains. Another worrying issue is the response time. More and more often, a response time of 20 thousand ms begins to appear, and once it was 70 thousand ms.

Just in case I write:
1) I checked the 650W power supply with a multimeter (though without additional load in the form of a cooler or, as they say on the Internet, 5W light bulbs), all voltages are normal.
2) Tried to change RAM, the problem does not go away.
3) I found my old power supply (450W), fully working, but replaced with a more powerful one. There is such a situation: the problem with the inability to turn on the computer after a power outage has disappeared, but after the first connection the hard drive is still disconnected and the system still hangs, the response time is still very long.
4)Only when turning on Windows Everything hangs, the response is great. When the computer is idle, the response is small (sometimes it happens 0ms and the read/write speed is 0Kb/s). But when starting a serious program or game, everything may freeze altogether.
5) I read that the hang may be due to the video card, I tried my own old video card, the problem did not go away.

And one more small question: I have such a case that it is very difficult to remove the video card. It gets stuck somewhere in the grooves. Have to unscrew motherboard. And after that, press on the back of the video card, where all the connectors are. Sometimes you have to hit your palm several times back and only then does she come out. Could this method harm her? I checked her with OCCT, everything is fine and the temperatures are normal. So she's okay? And what's the best way to get it out?

Answer: Good night. Finally connected the drive, as you advised.
The following situation turned out: the first disk with the system refused to work, when I pulled it out there was a large crack coming from a hole in the center (When I inserted it, it was not there. Although I might not have noticed any small crack). But just in case, the disk is already old, I tried installing the system from another disk. From there, the installation booted successfully. True, I only got to the disk formatting window.
Does this mean that everything is fine with the motherboard?
The drive was really noisy, but maybe that’s because I’m already unaccustomed to it.
If it's not the motherboard, then I don't know what the problem is.
And can you tell me: if the problem is in the motherboard, then when I change it, will it be possible to connect the old hard drives, or can they just ruin the new motherboard?







2024 gtavrl.ru.