Cartridge 725 refill. Necessary tools and consumables
If you have a canon 725 printing device (cartridge), what toner can you use? This is not an easy question. After all, all users of printing equipment always hesitate before deciding to choose between savings in work and high quality of operation. However, choosing one does not always mean not having the other.
For a Canon 725 cartridge, first of all, you should look for a branded toner. By purchasing this filler, you will avoid many problems with printing:
- - the appearance of gaps and spots;
- — short period of use of the filler;
- - poor quality work with drawings.
Cartridge model canon 725 A toner tailored to the specific technical requirements of the equipment is suitable.
Buying the right filler
You can purchase the required type of toner in Moscow at a specialized sales point. Only if you can get a guarantee for the product, give preference to such products. You should not respond to promotional offers and ultra-low prices. Otherwise, due to low-quality filler, you may sacrifice your own equipment. You can first familiarize yourself with the technical parameters acceptable for the powder in the online catalog. Pay attention to the following points:
- — compatibility with a specific type of drum;
- — availability of analog types of filler for cartridges;
- — starting mass of the powder.
Below you will find a useful video about refilling a canon cartridge 725:
How to refill a Canon 725 starter cartridge is one of the questions that often worries users of printing installations. It is recommended that you select your powder with particular care. Only 60 grams of filler is enough for refilling. It is worth paying attention to the types intended for HP, for example, P1005, 1006, 1505, 1102, 1566 and 1606.
At the very beginning, simply remove the right CANON cover. Pay attention to the special spring that cannot be lost. When pulling out the cartridge, simply gently but forcefully pull it towards you. First of all, the photoconductor is removed so as not to damage it. Then you need to clean out the excess powder from the small chip. After that, we start working with large fragments:
- — unscrew the screws;
- — remove the magnetic shaft;
- - disconnect the blade.
The spent hopper must be poured onto a pre-prepared flat surface.
How to work with toner?
Filler for Canon 725 cartridge very harmful to humans, so if possible you should use a respirator. To more accurately complete all tasks, use a brush.
On the gear side, you need to unscrew the cover, being careful not to break or damage the parts of the device. It is recommended to work with clean hands. The 725 cartridge is rotated to release the remaining toner. The surfaces are again treated with a brush.
You can add new powder using a funnel made of paper. You need to do this carefully, because there is very little space for filler.
After all the procedures, you need to carefully install the magnetic shaft in place. All plastic tips must fall into place.
If the instructions do not clear how refill canon cartridge 725 starter, the video will be useful to you. Otherwise, contact a service center to avoid damaging the device.
This toner is designed for the Canon 725 cartridge. Using Coloring toner at home or in the office can significantly save money and improve printing productivity.
Toner creates high-quality prints that last a long time.
The Coloring company is the largest manufacturer of toner and consumables and has been operating on the market for more than 15 years.
By developing technology and improving quality, Coloring has acquired a reputation as the best company of compatible consumables in Russia. All products comply with international standards and are confirmed by ISO 9001, 9002 and 1400 certificates.
By purchasing TM Coloring consumables for your printing equipment, you can be sure that this is the best combination of price/quality.
This toner is suitable for original and compatible cartridge Canon 725
Canon 725(toner weight 90 grams, resource 1500 pages, features when refilling: the chip does not block operation)
Toner is also used in printers and MFPs: / / /
Buy toner now for Canon 725 cartridge
To do this, add the product to your cart and place your order.
- By bank card
- Yandex.Money
- To the courier
- Cash on delivery upon receipt of the parcel at the Russian Post office
- At the pick-up point
- Transfer of 100% prepayment to the current account – for legal entities. Without VAT.
| Moscow(72 order pick-up points) | (1-3 days) | 240 rub. |
| Saint Petersburg(46 order pick-up points) | (2-3 days) | 240 rub. |
| Ekaterinburg(14 order pick-up points) | (2-4 days) | 290 rub. |
| Krasnodar(15 order pick-up points) | (2-4 days) | 240 rub. |
| Nizhny Novgorod(11 order pick-up points) | (2-4 days) | 240 rub. |
| Novosibirsk(23 order pick-up points) | (7-12 days) | 350 rub. |
| Penza(1 order pick-up point) | (2-4 days) | 290 rub. |
| Permian(4 order pick-up points) | (2-4 days) | 290 rub. |
| Rostov-on-Don(16 order pick-up points) | (1-3 days) | 240 rub. |
| Samara(7 order pick-up points) | (2-4 days) | 240 rub. |
| Ufa(4 order pick-up points) | (2-4 days) | 290 rub. |
| Other cities(553 order pick-up points) |
We deliver toner Russian Post and CDEK delivery service to any cities, towns, villages, etc. Shipping costs are calculated automatically. To do this, you must select your region when placing your order. The average toner delivery cost is 200 rubles.
We send each buyer a tracking number. Track number allows you to track and pick up the parcel at your post office.
For delivery times by Russian Post, see the section.
We ship by transport companies (PEK, Business Lines, Kit, ZhelDorExpedition, SDEK).
Pickup available. For the address and opening hours of the order pick-up point, see the section.
The manager confirms all orders by phone.
Every laser printer comes with a toner cartridge that helps in printing documents or images. There is no need to buy a new toner cartridge as you can easily refill the Canon 725 cartridge. But please note that the toner used for the job is labeled as HP 12A. You can use similar toners for other laser printers.
What will you need for work?
The tools needed to refill a Canon 725 cartridge with your own hands can be counted on one hand. Before you start refilling it, you need to buy high-quality ink. You will also need a screwdriver with an asterisk, newspaper sheets or any other paper. You also need a soft cloth, a sharp knife and a measuring cup. You don't have to use the latter if you fill it to the brim.
Where should I start?
After removing the cartridge from the laser printer, the first step is to remove the side cover screw. After this you can remove it. After you remove the outer shell, remove the drum unit. Hold it on the white gear side and pull it outward.
Remove the photoconductor and note its location. Now you need to connect the PCR roller. Lightly press the right side of the rod using any sharp tool. Then slide the roller up a little and remove it by pulling it to the left.
Final disassembly of the cartridge
The next step is to separate the block of waste and ink, which are connected together using pins. Therefore, you must remove the pins that are on both sides of the cartridge.
After you push the pin out from the inside, you can pull it out from the outside. Once you remove the contacts on both sides of the toner cartridge, you should remove the spring.
Next, install the two main cartridge blocks. One is for waste and the other is for ink. Now you need to remove the spring and plastic cover. Remove the waste block screws to expand the wiper blade. After this, remove the waste that collects in it. It is best to clean with a soft cloth rather than a brush, as this may scratch the blade.
Then you need to assemble the parts of the mining block. Install the wiper blade first and then the plastic cover.
Refueling process
And now directly to the instructions for refilling the Canon 725 cartridge. What you did earlier is disassembling the waste unit and cleaning it. Now comes the main part, which is filling the cartridge. So, take the other block where the ink is. Open it and fill it with ink (dry). Handle the powder carefully, as inhaling it into your lungs can be harmful to your health.
It is recommended to wear gloves, but if you happen to remove toner from your skin or any objects, do it only with cold water. Due to exposure to high temperature, the powder will only be absorbed more strongly. The toner must be dry; it is not allowed to refill the cartridge with wet powder. After refilling the Canon 725 cartridge, you need to close the compartment. Next, you can connect the two blocks that were separated earlier.
What else should I change?
Now you can assemble the entire cartridge; for this you will need to install the photoconductor, magnetic shaft and rubber roller in their places. It is worth noting that all these elements have different resources, so when repairing a cartridge you need to focus on approximately the following data:
- The photoconductor drum should be replaced every three refills.
- The magnetic roller and the rubber roller last a little longer - up to 5 refills.
- Magnetic shaft cleaning blade - 3-5 refills.
If measured in printed pages, then one refill is enough for approximately 500-600 sheets. And this is one pack of paper, maybe a little more.
But it also happens that the body itself wears out - in this case it will be much easier and cheaper to purchase a new cartridge, even a Chinese analogue. These elements cannot be restored, and buying a new one will cost about the same amount as you need to spend on purchasing components.