Bios on a Sony laptop. How to enter BIOS on a Sony laptop

The fact that Sony Corporation is one of the leading manufacturers of computer or mobile equipment probably does not need to be explained to anyone. True, sometimes she throws out such “surprises” that an unprepared person will clearly have to rack their brains for many hours before figuring out what’s what. In particular, this applies to laptops. Many of their “lucky” owners do not understand at all how to enter the Sony Vaio BIOS. Well, since this is the case, let’s try to figure out this rather interesting and difficult question.

Sony Vaio: “charms” and vagaries

Let's start a little from afar. To be honest, many computer scientists still don’t understand why the corporation’s specialists, as they say, out of the blue make life difficult for users. First of all, this concerns the installation of hard drives in their “advanced” laptops, which clearly do not correspond to the capabilities of the computer system as a whole. They also have a rotation speed of 5400 rpm.

And this is far from the only example. The same goes for the problem, Sony Vaio. Alas, many users complain that the standard pressing of the Del key, as is common in most computer systems, does not lead to anything. It is not surprising, because any manufacturer of equipment of this type, depending on the motherboard, sets its own rules for the use of access sequences in the subsystem. But in Sony Vaio, entering the BIOS is not so much a complex problem as it is original and even far-fetched (a little later it will become clear why).

In addition, the principles of access to the subsystem differ quite significantly between different models. Somehow I can’t believe that this is connected exclusively with motherboards. Nevertheless, in Sony Vaio there are several ways to enter the BIOS, and one of them does not fit into the concept of common sense at all. But let’s try to consider all the available options, so to speak, from a general point of view.

Standard login method

So, on almost all well-known laptops, including outdated Sony Vaio models, the subsystem is entered by pressing the F2, F3 keys or pressing them together with Del. If we talk specifically about the products of this manufacturer, you can get into the BIOS on a Sony Vaio laptop only if you press the corresponding key several times.

It also happens that both F2 and F3 are intended for this. Some people try to press one of them several times, but the result is zero. Here you need to try using them one by one, since sometimes the system simply does not have time to intercept the signal from the keyboard. But the “surprises” don’t stop there either.

Alternative login method

It is she who is responsible for entering the BIOS, or rather, not even the BIOS, but the so-called “Rescue Menu”. It goes without saying that to achieve the desired effect, it also needs to be pressed several times. But after the signal is triggered, literally within two seconds the desired menu with options for selecting actions will be displayed on the screen.

How to enter the Sony Vaio BIOS from this menu? Yes, it’s very simple - press the F2 key. And, lo and behold! Subsystem settings have finally become available. Now you can safely start working with the basic parameters.

Exiting the subsystem is carried out in the classic way: either through the menu with the Save&Exit Setup line, or using the F10 key (okay, at least they didn’t trick us here, otherwise the user, exhausted while searching for a solution to enter, would still begin to puzzle over how to get out of here now ).

Sony Vaio: how to start BIOS if standard methods do not work

However, in the Sony Vaio line of laptops there are rare exceptions when none of the above methods work. What to do?

Firstly, if the laptop was officially purchased, you should look at the accompanying set of technical documentation or user manual. As a rule, you can find a whole section there dedicated to entering the BIOS. Secondly, in Windows, in the system information section, you can find out the BIOS version and look for a description of logging into it. Thirdly, in the same section you should look at the markings of the motherboard and try to search for a solution to the problem (entering the BIOS) using these parameters. It goes without saying that in search engines you can also enter the full abbreviation of the modification of the laptop itself, but in most cases this does not really help.

Conclusion

In general, as is already clear, not everything is so simple with Sony Vaio laptops. As they say, there seems to be a door to enter, but no one knows where it is located. By the way, there is still controversy surrounding this incident from Sony Corporation. After all, even from a logical point of view, it is completely incomprehensible why it was necessary to make such a tricky decision, and not use standard, generally accepted methods. It’s the same as deliberately taking a detour, despite the simplest and shortest path, thereby complicating your task.

And so, to enter the Sony vaio BIOS, turn on the laptop and press the key F2, if the BIOS is not displayed and the normal system boot begins, then try pressing other keys F4, F8 or key Delete.

On the Sony vaio PCG-71812V model, the key is used to enter bios F2. Let's look at what menu items and settings this BIOS provides us with.

First section - Main. This section displays information about the BIOS version, serial number, RAM size - 4096 MB, hard disk size - 500GB. The only thing you can configure in this section is to set the time and date.

Next section - Advanced. There is only one tab in this section - Virtualization Technology. You can disable it( Disabled) or enable( Enable). To do this, press the Enter key and use the arrows on the keyboard to select the function - Disable / Enable, then press the key F10 And Enter.

Next section - Security. In this section you can set passwords.

Set machine password- Set a password when entering the BIOS.
Set user password- Set a user password.
Password when power on- Set a password to log into the system.

To set a password, as usual, select the tab where you want to set the password, press the key Enter and enter a password. After everything has been done, press the button F10 to save settings.

And so the most important and necessary section of the BIOS.

Boot from a USB flash drive or CD-Rom Sony Vaio.

To boot from a flash drive or cd-rom into the BIOS we need a section Boot.

Boot Configuration

External Device Boot- Boot from external device

Internal Optical Disc Drive- internal optical drive
Internal Hard Disk Drive- internal hard drive
External Device- external device
Network- net

Select the tab using the arrow on the keyboard External Device Boot press the key Enter In the drop-down menu, click Enable. In this way we allow downloading from external devices.

Next, use the arrow on the keyboard to go down, selecting the tab External Device(External device) and now not with an arrow, but by pressing a key F5 We raise this tab to the very top, thereby setting the priority for loading from a flash drive into the BIOS. To download from CD-rom, you need to select a tab Internal Optical Disc Drive and also with the key F5 raise it to the very top, then the download will be from CD-ROM. After setting, be sure to save everything by pressing the key F10. . I hope it's clear!

The last section of the BIOS is Exit(Exit) . There is definitely nothing to configure here, everything has to do with logging out and saving from the system.

Exit setup
Get Default Values- Exit and save default settings.
Вiscard Changes- cancel changes.
Save Changes- Save changes.
Shutdown- Malfunction.

Well, that's all friends, I hope everything is clear to everyone, how to enter bios on a Sony vaio laptop and set to boot from a Sony Vaio flash drive. If you have questions or additions, be sure to write in the comments, I will help everyone in any way I can. Good luck!!!

Sony, headquartered in Tokyo, is a multinational corporation. For happy owners of a Sony Vaio laptop, it sometimes becomes difficult to enable sony bios (OS subroutine). Let's look at several options for how this can be done.

How to login

There are several ways to enter the Sony Vaio BIOS, depending on the device model:

1. Using the special Assist key.
2. By pressing F2.
3. You can get into the BIOS (BSVV, set of firmware) using the combination Esc + F2.
4. Launch BIOS by typing F2+F3+ Delete.

Attention! Before pressing the selected combination, the device must be turned off. How to open the BSVV depends on the year of manufacture of the laptop.

If the laptop was officially purchased, then look at the documentation for it. This can be done on the official website. You need to use a search engine and enter the model number there. Often the hint when starting the device “Please use (required button) to enter setup” helps to determine the desired combination.

F2 button

On most Sony Vaio models, there is a set of firmware keys F2, DELETE, F3. A combination of F2+DEL, F3+DEL is possible. In new Sony Vaio models, the key combination F8 and F12 can be used to open Bios.

To login:

• start the laptop;
• alternately press F2+DEL;
• we do it quickly;
• Login occurs in a couple of seconds.

Attention! Only one F2 key is always responsible for opening system firmware; the combination is the entry code. For it, press the desired key periodically until the subroutine opens. When using a combination, you should try to press not two “positions”, but alternately, hold one and press the other with a short interval of time.

Combination Esc+F2

The developers explain the variety of options for opening the BSVV (firmware set) by installing different motherboards. For this reason, there is no single sign-on to open the subsystem of the device, it depends on the model number and year of manufacture of the Sony Vayo.

ESC+F2 combination:

• turn on the laptop;
• when the word “vaio” appears on the monitor, press ESC+F2;
• after pressing frequently, the OS subsystem (operating system) settings tab will be displayed.

If the BIOS does not open and the system continues to load Windows, you need to “reboot” the device. To do this, frequently and periodically press the ESC+F2 buttons.

Dedicated Assist button

You can enter the BIOS on a Sony Vaio laptop by pressing the Assist key. Users try proven and standard login methods using the F2 and DEL buttons. The new models of this company differ from all previous ones in the arrangement of buttons and a non-standard keyboard. The Assist key is intended to call up the special “Rescue Window” menu.

Note! The Assist button must be used in the same way as all the others. In other words, after starting the laptop, press frequently and periodically until the menu appears. It will appear on the monitor in a couple of seconds. Next, the user will be offered options for action.

To login:

• press Assist;
• the menu opens;
• press F2;
• we get to the subsystem settings window.

When the user has opened the BIOS, one must remember that selecting actions and navigating through the settings must be done using the keys: “←”, “”, “→”.

How to exit

The user usually enters the BIOS to set the priority of system actions. This must be done when reinstalling the OS (operating system). After receiving the necessary parameters, you need to exit the system settings window.

Procedure for using the Assist button to enter:

• turn on the laptop;
• press Assist;
• we get to the menu;
• Press F2, the BIOS window opens;
• select the action: “run from disk/USB device”;
• exit with (or without) saving the settings, ENTER.

With saving parameters

Many advanced users reinstall Windows OS on their own when:

• due to a technical error it does not work;
• violations occurred in the event of a virus attack.

Actions with saving parameters:

• go in one of the described ways;
• standard settings open, where: serial number, BIOS version, etc.;
• go to the “Boot” page;
• set the necessary parameters for startup priority, laptop from a flash drive, from a disk;
• save, press F10;
• confirm saving by clicking “Yes”;
• click on ENTER.

No saving changes

Often the user needs to find out the system parameters, check the order of starting the product from a disk, flash drive, or hard drive. To do this, he goes into the BIOS (Windows system settings subroutine).

This is done like this:

• open the laptop;
• go to the BIOS using one of the methods;
• after viewing the information, in the main window select “without saving” (Exit Without Sawing, Quit Without Sawing);
• a tab will open, you must specify Y/N (yes or no);
• press the “Yes” (Y) button, then ENTER.

Attention! After pressing ENTER, the user will exit the BIOS without saving changes to the system routine, and the laptop will continue loading the Windows OS.

Options when you do not need to save changes:

• accidentally changed the wrong parameters;
• uncertainty in choosing changes;
• there is no point in making changes.

The F10 and ESC keys are responsible for exiting the BIOS. To do this, go to the main page of the subroutine.

From the considered options for opening the BBBW of a Sony Vaio laptop, it becomes clear that developers specifically change the BIOS entry on different models. Reinstalling the OS should be carried out by trained specialists. You should always remember that when changing subsystem parameters, there is an option to take the laptop out of working condition, after which a complete re-flashing of the computer will be required.

I haven’t been installing and configuring PCs for friends for five years now, but last weekend a very good friend asked me to install an SSD drive and Windows in a Sony laptop. He bought his laptop quite recently, but the endless brakes of the disk subsystem had already taken its toll. To be honest, I still don’t understand how manufacturers push ordinary 5400-rpm screws into fairly expensive laptops. Complete perversion! This whole thing is terribly slow and the user gets a slow laptop immediately after purchase.

Seriously, when I bought my last laptop, the first thing I did was get rid of the hard drive. Even if the laptop has at least three times the coolest stone (I have a Core i7) and a carload of RAM, without a fast disk subsystem you will never fully experience all these wonders.

I couldn’t refuse my friend and decided to remember my youth, so to speak - the time when reinstalling Windows and upgrading hardware was extremely interesting. I took a screwdriver and began to unscrew the bolts from the hard drive bay. I unscrewed it, pulled out the old screw and installed an SSD from Plextor in its place. I turn on the laptop, try to go into the BIOS, and get stuck. Instead of the usual screen with settings, the laptop writes “Operating system error”.

At first I thought that I didn't have time to press F2 during loading. I tried to repeat it, but to no avail. Keystrokes Delete, F2+Delete also did not give a positive result. This is where I got a little confused. There was nothing left to do but turn to Google for help. Literally the first link in the search results led me to the SONY knowledge base, which contained the answer to my question.

Turns out, to enter the BIOS on a Sony laptop you need to turn off laptop and press a key ASSIST. I turn off the laptop, press the ASSIST key on the laptop panel and the laptop starts to boot. Literally after 2 seconds the start menu appears, from which you can immediately go to the BIOS.

The problem was easily solved, but I still don’t understand why Sony decided to show off? On all the laptops I've ever used, entering the BIOS was done via F2 or Del. When you turn it on, a message like “To enter the BIOS, press F2...” always appears. In the case of a Sony laptop, nothing appears. The user must find out this information from the small book that comes with the laptop. Well, isn't it perverted? Wouldn't it be easier to stick to the standard?

Okay, let's assume that it is the users' own fault for not reading the instructions. Then the question is, what’s the point of making an additional key on the device? I only go into bios before reinstalling Windows. I do this procedure once every three years. The question is, what’s the point of putting an additional button on the body for such a rarely used procedure?

In general, some companies try to make life easier for users, while others, on the contrary, make it more difficult. I have never bought laptops from Sony and most likely never will. I'd rather buy a MacBook Pro for this money.

Sony Vaio laptops, although they are powerful modern computer devices, however, with a Windows system installed on them, can also be subject to software failures when it is necessary to apply some settings specified in the primary BIOS input/output system. This is where the problem arises of how to enter the Sony VAIO BIOS. As it turns out, this is not easy to do, since the solution used is sometimes radically different from the standard one.

Sony VAIO laptop: how to enter BIOS in the standard way?

Unfortunately, many owners of devices from this model range are somewhat perplexed as to why their creators needed to complicate life for users.

The fact is that the standard combination in the form of the familiar three-finger combination with the Ctrl + Alt + Del keys pressed does not work here. The user begins to rush around in a panic, looking for at least some way to get to the primary system, examining his Sony VAIO Pro laptop up and down. How to enter the BIOS in these particular models will be discussed a little later, but for now we will focus on the solution proposed for the aging line of devices.

Entering the BIOS is done using the F2 or F3 keys. But the catch is that the time to press is quite limited, sometimes you have to press the same key several times or use both keys alternately.

Some models use a slightly different solution, partially reminiscent of the previous one. In them, the problem of how to enter the Sony VAIO BIOS is solved using the F8 or F12 keys. Again, sometimes pressing once does not produce results.

Sony VAIO Pro: how to enter BIOS using an alternative method?

If you look at later modifications, they use a solution that the average user, without outside help, perhaps would not have guessed.

In this case, the problem of how to enter the Sony VAIO BIOS is solved by pressing the special ASSIST key located directly on the keyboard panel in the upper right. True, for some reason the input mode is called VAIO Care (rescue mode), and not the direct input expected by the user.

First, a special menu appears in which you need to select an action option. And to gain access to the BIOS system you need to use the F2 function key.

So, the entrance has been completed. Fortunately, in Sony VAIO laptops, setting up the BIOS and basic parameters of the computer system is done using standard methods, and the menu names do not differ much from the generally accepted ones. In the same way, the changed settings are saved and exited (F10 and the letter “Y” to save the parameters).

What to do if login is not possible?

But these were only the main methods used. But it often happens that none of them work. What to do in this case? Most experts advise reading technical documentation or using information about the installed motherboard and then searching for a solution to the problem by modifying it.

You can obtain such information from the Device Manager (devmgmt.msc) or from the full description of the system configuration (msinfo32). The given shortcut commands are entered in the “Run” console, called up by pressing the Win + R keys together. After this, all that remains is to enter a search query and see exactly how you can enter the primary system.

To make a more precise request, you can use the serial number of the motherboard or special identifiers DEV and VEN, which can be found in the properties of the motherboard controller in the “Device Manager” (use the information tab for this) or in the same system configuration.

Conclusion

As can be seen from all of the above, the problem of how to enter the Sony VAIO BIOS, although it looks somewhat difficult at first, is nevertheless solved quite simply. It all comes down to clearly finding out which keys are used to enter in each specific model. On the other hand, for every owner of such a laptop, if there is an ASSIST key on the panel, it should be completely obvious that you can get into the settings of the primary system using it, so experiments with other options will be a waste of time. If a different combination is used to enter, it is better to review the user manual that comes with the kit in advance. Finally, if it’s not there, you’ll have to dig around on the Internet. In any case, a solution can be found. There would be a desire.