Safe entry. Ⅵ Enter Safe Mode through an incorrect system shutdown

Experienced PC users know about such a Windows option as “Safe Mode”. It is necessary in modern operating systems, because the latter are by no means infallible. Mistakes happen, and sometimes it’s not possible to correct them in working order. With XP and 7 everything was more or less clear. But with version 10, everything has become much more complicated. Standard entrance safe mode turned off. Now this is not so easy to do. It is unclear what caused this decision by the developers. But the fact is undeniable that the seventh version was much clearer than the newfangled “ten”. However, even in the times of XP they said so. So, most likely, users will get used to this “miracle”. So how to log in safely Windows mode 10? Let's talk to them about this.

What is "safe mode"?

Safe mode is a way to boot the system with only the most important drivers. That is, only those components that are necessary for minimal system functionality will be loaded. No additional codecs, flash or other unnecessary nonsense. This mode is used to correct operating system errors, return to early state using system restore. Also, some viruses can only be removed in this way. Therefore, everyone needs to know how to enter safe mode in Windows 10.

Sometimes this OS condition requires an "accounting" fix or a local conversion. Naturally, to carry out this procedure you need access to the Internet. And this is where the “Safe Mode with Boot” option will help. network drivers". Tens users need to choose this option, because to fix account It won't work without the Internet. And this brings us back to the question of how to enter safe mode

How to log in if the OS is starting?

There are various options for loading "tens" in safe mode, if everything works fine. The simplest one is to click on “Shutdown” in “Start” while holding down “Shift”. You will then be prompted to select a download type. All you have to do is choose the one you need. Also try "returning" the mode launch when pressing F8. You just need to enter the required text in the commander line. How to enter Windows 10 safe mode via command line? More on this below.

There is another option. Enter "Options" and then - A lot of unnecessary text will appear with the available options. Among others, there will be the items “Restart the computer in safe mode” and “Restart the computer in safe mode with network driver support.” Select the one you need this moment, and reboot the PC or laptop.

You can try another procedure like this. Go to “Start”, select “Run”, enter “msconfig” (without quotes). A dialog will appear with a “Download” tab. Among a fair number of items there will be “Boot Options” and “Safe Mode” with a bunch of options. This is what needs to be ticked. And then just restart your PC.

Using the command line

Go to “Start”, select “Command Line” and enter the text in Commander: “bcdedit /set (default) bootmenupolicy legacy” (without quotes). Then reboot the machine and press F8. The Windows Start Options window will appear. Here we select "Safe Mode". Whether network drivers will be needed is up to you to decide. This is one of the answers to the question of how to enter safe mode

The most important decisions are usually made through the commander. various problems. But in the “ten” it is best to use Windows Power Shell - a console borrowed from the Linux OS family. This tool allows you to run commands as an administrator and is much faster than the standard commander. And it is clearer to those who have at least once used Ubuntu or Mint. The command line method works on any Microsoft operating system (except XP). The company from Redmond did something adequate. Honor and praise to her!

What to do if the OS does not start?

There is only one way here. There is no way to launch Windows in Safe Mode. Therefore, you need a flash drive with the Tens distribution kit. When loading the installer, you can pull off a trick with the commander and force Windows to boot from the HDD in safe mode. You just need to find the inscription “System Restore” in the installer’s welcome window. A commander will appear there, into which we enter the text we are already familiar with (without quotes). Now reboot your PC or laptop. This is one of the answers to the question of how to enter Windows 10 safe mode through BIOS.

Many people believe that if the operating system does not want to work, then the easiest way is to reinstall the OS. On the one hand, this is so - clean system always works faster. But on the other hand, frequent reinstallations of the operating system are certain death for hard drive. Not to mention the fact that there is a lot of time to kill full customization systems. This does not include the time required to install it. Therefore, it is easier to solve all problems that can be fixed using Safe Mode.

ASUS laptops

There are some nuances here. The fact is that ASUS laptops have a kind of entrance to boot menu(select media when loading). Before performing actions with the commander in the "tens" installer, you need to force the laptop to boot from the drive with the distribution kit. To do this, just hold Tab at startup and select desired type downloads. How to log into safe mode in Windows 10? ASUS is the same PC. That is, the method with the commander from the “tens” installer also works.

In general, Asus laptop manufacturers have their own concept of convenience and ergonomics. That is why the engineers deviated from the standard canons and assigned some crazy keys for low-level laptop control. Therefore, before trying to change the BIOS settings, you need to read the instructions very carefully. Otherwise, your “correct and standard” actions can lead to very sad consequences.

Acer laptops

The most problematic in this regard is the E5-731 laptop. In order to get into the boot menu of this laptop, you need to do a number of operations. First you need to press Enter to get into the laptop BIOS. Then go to the "Boot priority" tab and select our flash drive with the "tens" installer. Now be sure to reboot the device. The laptop will boot from the drive, not from the HDD. How to enter Windows 10 safe mode in Acer E5-731? Using the commander in the installer. Exactly the same as in the previous examples.

With the Acers, everything is somehow unclear. This method of getting to drives with distributions was used in ancient times. system units with processors from AMD and why manufacturers decided to choose this particular method is unknown. But in this situation, after manipulating the commander, you will have to return to the BIOS again and set the priority to starting from the HDD. And this is completely inconvenient.

Lenovo laptops

How to enter Windows 10 safe mode through the BIOS of Lenovo laptops? It's easiest here. When starting the device, just press the F12 button and the media selection menu will appear. Select the flash drive and boot. And then we proceed according to the already known scenario with the command line and the right command. Laptops from Lenovo are the simplest in this regard. Chinese company clearly knows a lot about ergonomics.

In general, Lenovo laptops are in no way inferior to more famous brands in terms of quality and layout of control elements. And in the case of Windows 10, they behave more adequately than other models. There is even an interesting option with Safe Mode for those who use UEFI. Just press Delete at startup and launch options will appear. Well, what's not to love?

Conclusion

Of course, entering safe mode in Windows 7 was much easier. But he hasn’t gone anywhere in the top ten either. The developers just made it less accessible. But with the help certain commands or actions, it is quite possible to load the operating system in this mode. And after that, you can correct errors in drivers, the operating system itself and its components. The main thing is to do everything clearly according to the instructions. Then there will be no problems.

If none of the above methods helped fix system errors, that is, at least two ways. The first is to reinstall the entire operating system. This advice is not without common sense, since fresh Windows always works better and faster. If you don’t know how to install, or you don’t have free time, then there is only one way out - take your laptop or PC to a professional workshop. They will do everything quickly and painlessly. But it will cost money.

In today's article, we'll look at how to enter Windows 10 safe mode if the laptop/computer is working properly or the operating system does not start for some reason. The fact is that the usual way of calling a window with choosing an option to launch the operating system has become irrelevant. It has been replaced by several methods that allow you to turn on your PC in safe mode.

Windows 10 Safe Mode, called Safe Mode, is a diagnostic boot mode of the operating system designed to find and solve many problems in the operating system in order to return it to working condition. This mode is used in cases where the computer refuses to start in normal mode, from the last known good configuration, or it is impossible to perform any action due to the use of target files and drivers of Windows 10 itself.

While the PC is booting into Safe Mode in RAM only the components necessary for the launch and operation of the operating system are placed, such as drivers, system services, explorer, OS kernel. Applied software and drivers for peripheral devices that are not needed for computer operation are not loaded.

Safe mode is useful for removing viruses, correcting errors with drivers that have arisen due to their imperfections or incomplete compatibility, eliminating the cause blue screens and freezes, uninstalling programs, system recovery, activating an administrator account, etc.

The option to boot the computer into, familiar from the 7, safe mode- use of the utility for system configuration.

1. Launch the command interpreter presented dialog box with the name “Run”, which is launched using “Win ​​+ R”.

2. Enter system command“msconfig”, which launches a utility to configure the launch of Windows 10.

By the way, the command can be run through the search engine Windows line 10.

3. In the window that appears, activate the second “Boot” tab and select the operating system that should be launched in diagnostic mode.

4. Check the box below the form with the list of OSes for the “Safe Mode” option.

• “Minimal” - classic safe mode with a minimum system components and Windows Explorer;
• “Another shell” is the new name for the configuration, which was called “With support command line»;
• “Network” - with the launch of network drivers in order to use the network connection.

6. Click “Apply” to confirm your intentions and click “OK” to close the window.

7. Using the “Start” menu or another convenient option for shutting down the computer, reboot it.

8. After we launch the system configuration window, and on the “Boot” tab, uncheck the previously checked box in order to return the computer startup to normal mode.

Special launch options

Another method that allows you to Windows startup 10 in safe mode if it starts. As in the previous version, all actions consist of performing simple operations.

1. Open the “Options” window using search bar, the combination “Win+R” or the “Start” button.

2. Click on the title of the “Update, Security” section, where we go to the “Recovery” subsection.

3. Find the item “ Special options..." and click on the "Restart now" button.

4. After the equipment self-test, the screen will appear additional options start the computer, where we select the “Diagnostics” option.

5. Then click on “ Additional options", "Boot options" and click "Restart".

6. In the launch options menu, select desired mode start the computer using the F4 - F6 keys.

In order to launch “Special options” in the case when the “ten” does not load, but the lock screen is displayed, while holding down the “Shift” button, select the “Restart” option after clicking on the button to turn off the computer.

Using the boot device to invoke safe mode

Don't know how to enable safe mode on Windows 10 when it won't start at all? Read the current section to the end.

The only thing you need to run the “tens” in diagnostic mode is bootable media with operating system installation files. An OS recovery disk is also suitable, but it is available from limited quantity users.

1. Start with bootable flash drive using Boot Menu your BIOS.

2. Press the “Shift+F10” keys to launch the command line or click on “System Restore” in the window with the “Install” button, where we call “Diagnostics”, go to Extra options, call the command line.

3. Using the command line, run the command: “bcdedit /set (default) safeboot minimal” to launch the classic debugging mode, and then replacing “minimal” with “network”, we boot into diagnostic mode with the launch of network drivers.

4. Close the command line window and reboot.

5. After solving the problems, reboot the OS, launch the command line as before, and enter and execute: “bcdedit /deletevalue (default) safeboot” to turn off safe mode.

Last method

This method will display a window where you can select one of the advanced Safe Mode options. Moreover, it is applicable to any operating system installed on a PC.

• Call the command line by booting from the installation flash drive.
• Enter a long command: “bcdedit /set (globalsettings) advancedoptions true”.
• After the notification appears about it successful completion reboot by closing the command line.

After the computer restarts, a window will appear with a list of advanced OS boot options.

Next, to deactivate this method of turning on the computer, you need to run: bcdedit /deletevalue (globalsettings) advancedoptions. The command is entered into the command line, called with administrator privileges.

We return the menu called by the “F8” key

If you want to know how to enter Windows 10 safe mode using classic way- “F8” key, finish reading the lines below.

Returning the call to the window with a list of methods for starting a computer is done by editing the “tens” launch configuration file.

1. Launch the command row with the privileges of an administrator account.

2. Execute “bcdedit /deletevalue (current) bootmenupolicy”.

3. After the text “Operation Complete” appears, restart the computer.

4. After self-testing the hardware shell, press “F8” until we see the familiar window with an expanded list of options for launching “dozens”.

To cancel calling the extended list of PC startup options, use the command “bcdedit /set (current) bootmenupolicy standard”.

Choose the appropriate option and fix errors in the functioning of Windows 10 without having to reinstall it.

Hello everyone, today I want to talk about how to enter Windows 7 and enter safe mode, what problems may arise and how quickly you can overcome them, let's get started!

Sometimes after installing a new driver (program) or changing computer settings, the operating system simply stops starting (or malfunctions). Moreover, it is impossible to even eliminate the cause of the problem, because for this you need, at a minimum, to start the system.

In this case, starting in safe mode (failsafe mode) will help. This launch differs from the usual one in that it uses minimum operating parameters and only the most necessary drivers. This way, the file that is causing the problem will simply not be executed, allowing the system to start. And you can safely remove it from safe mode.

You should use Safe Mode for the following problems.

• Updating or installing a new driver. Usually the problem occurs due to graphics driver, because it is he who is responsible for displaying information on the screen.
• Changing screen resolution. If the resolution has been changed to one that is not supported by the video card or monitor, the information will no longer be displayed. If you do not touch anything for several seconds, the system will return the initial parameters. But the user can randomly (for example, by pressing Enter keys) save the changed resolution.
• Viruses. There are viruses that simply cannot be removed normal mode. They run along with the system and block all attempts to remove them.
• Change settings. An inexperienced computer user may simply accidentally change important parameters. For example, disable desktop display.

Now let's look at ways to start safe mode.

Ways to enter Safe Mode in Windows 7

The easiest way is when the computer starts. During the boot process, you must press the F8 key several times. If, after doing this, nothing happened, and the manufacturer’s logo appeared on the screen, it means that pressing the key was done too late. You must repeat the steps by restarting your computer.

Sometimes the function keys (F1-F8) are disabled, and, accordingly, the system will not respond to them. To fix this, you need to first hold down the key Fn, then press F8. Function keys, most often disabled on laptops.

If everything was done correctly, a window for additional boot options should open.
We will be offered 3 options for safe mode:

1. Ordinary.
2. With loading of network drivers.
3. With command line support.

Most often, only the regular version is useful.

After selection the desired option All you have to do is wait a few minutes, after which the operating system will be launched. Before we start, the system will ask us if we want to use System Restore. If ever created backup copy system (restore point), then this function will allow you to use this copy.

By default, restore points are created automatically when any major system parameter is changed (for example, installing or uninstalling drivers).

Starting Safe Mode from Windows

If you don’t want to restart your computer right now, you can start safe mode directly from Windows environment. To do this we need to use the service msconfig. To do this, open “Start” and enter the name of the service in the search bar. You can also open it using the “Run” command.

After this, the “System Configuration” window will open, where you need to go to the “Download” tab. Now all that remains is to click on the checkbox “ Safe mode” and select download options.

We have 4 loading methods and 4 additional options.

1. Minimum - Graphics mode work with launching only the most necessary drivers.
2. Another shell - Working using the command line.
3. Recovery Active Directory— Graphical mode of operation with service launch Active Directory.
4. Network - With the launch of all network components.

Extra options:

1. No GUI - Disables the Windows welcome screen.
2. Download log – allows you to save all download information in a log. It is saved in a file %SystemRoot%Ntbtlog.txt.
3. Basic video – activates the minimum operating mode of the VGA graphics driver.
4. OS information is a function that will show the user a list of downloadable drivers.

If you often use Safe Mode, you can enable the “Make these boot settings permanent” checkbox so you don’t have to set this data again in the future.

After saving this data, the system will ask if you need to start Safe Mode right now. If this is necessary, then you need to click on the “Reboot” button. If you need to log in later, you need to click “Log out without rebooting”.

Erroneous launch of safe mode

If the operating system itself starts safe mode without user intervention, then the computer may have malfunctioned. This could be due to the recent installation of a new driver or program.

The first thing you need to do is try to start the computer in normal mode. Most often, the system can be loaded even after errors appear. But if the launch turns out to be a failure, then you will have to correct errors in safe mode. You should start by removing those programs and drivers that presumably caused the failures.

If automatic start safe mode was performed for a more serious reason, for example, loss or damage to system files, then everything can only be corrected using the system restore function.

Conclusion

Safe Mode allows you to solve many problems without resorting to such tough and lengthy actions as reinstalling Windows. Therefore, everyone should be able to use this mode. Moreover, it runs approximately the same on all operating systems, so no matter what Windows is installed, there should be no problems with this.

A must read.

Sometimes it happens that the system refuses to work stably. The reason for this instability may be the activity virus programs, problems with device drivers, accidental or intentional deletion of system files, and more. Therefore, it’s worth dwelling on the question of how to enter safe mode in Windows XP in a little more detail.

In such cases, as luck would have it, you need to quickly return the computer to normal operation. One of the options for solving this kind of problem is to use safe mode. Because if you go into safe mode, you can troubleshoot problems and enter the familiar Windows system for further work.

Entering Safe Mode

To enter safe mode, you need to turn on the computer by pressing the “Power” button, as we do every day (or restart it if you have already turned it on). But without waiting for Windows to load, when inscriptions appear on the screen on a black background and a short sound sounds sound signal, you need to press the “F8” key.

After some time, you will see a menu with a choice of different modes. The first three modes are varieties of safe. The list begins with a simple “safe mode”. This mode is called safe mode Windows operation, which loads only the essential services and device drivers needed for stable operation operating system. In safe mode you can cure your computer from infection malware, which may not be possible in normal Windows operation.

I have an article on my blog in which I tell you how to remove viruses, read.

If you have one Windows OS installed, in the next window press “Enter” or select the system you want to boot into.

When your operating system boots into Safe Mode, it will ask if you want to continue in Safe Mode or if you want to use System Restore. In this window, you can safely click “Yes”.

If you have a different system, then use the following links: and.

If you can't enter safe mode

You learned how to enter safe mode a little higher, but if suddenly for some reason you are unable to boot into safe mode, do not despair. For such cases, there is a wonderful utility called SafeBootKeyRepair, which you need to download and run. This program works for Windows 2000/Windows XP. To download SafeBootKeyRepai, click .

You can also use *. reg file(for Windows XP), click to download the file. Open xp-safeboot.reg and click “Yes”, thereby you agree to changes to the registry. After this, a message will appear that all changes to the registry have been successfully made, click “OK”.

If you have Windows Vista/Windows 7 installed on your computer, you need to download the . Open the file and agree to the changes that will be made to the “YES” registry.

After all the steps described in yours, restart your computer and try to enter safe mode.

Next on the list is safe mode with loading network drivers. This mode is advanced and allows you to use the Internet.

Safe mode with command line support - the mode is an MS-DOS emulation. But we will leave MS-DOS alone, since it is very rarely necessary for the user, because it uses commands that you need to know.

I also really want to point out important point in choise various options downloads. This is loading the last known known configuration (with working parameters). This mode helps out very often, for example, the system refuses to boot. In most cases, this loading option results in Windows recovery, and you can continue working without any problems.

Now I’ll briefly talk about three latest modes, which may be useful to us. Regular Windows boot– standard, the most ordinary loading of the operating system with all the necessary services and drivers. You will boot in this mode when you fix all the problems.

Return to operating system selection – this mode is used if you have several operating systems installed on your computer. This is sometimes required and is associated with the specifics of working on a computer with various programs. In this mode, you can choose which of the installed operating systems to load into RAM.

Today I told you how to enter safe mode in Windows XP, what problems may arise, and how you can deal with them. I sincerely wish that you have to use safe mode as little as possible.

I have a little news, I'm going to buy an inexpensive car. Since I have no experience in purchasing or choosing, I will be glad to receive feedback from car enthusiasts. What kind of car can you buy for 6000-7000 thousand dollars? What to look for when purchasing?

Working with operating system For a long time, most users have never encountered safe mode and do not know what it is. In order to start the system without additional programs or parameters, you need to start in safe mode. We offer you, dear Windows users 7, figure out how to enter safe mode.

Safe mode is a very useful "thing". For example, it so happens that you downloaded malicious application to my computer and I can’t delete it in any way. In addition, the virus has probably already loaded into memory and can only be disabled by rebooting. After it, it returns to memory again and begins to “litter” there and slow down the operation of the system as a whole.

You may have deleted some system files and now the computer does not work the way it did before. Constant crashes, frequent self-reboots or even shutdowns are clear reasons to boot into safe mode. Moreover, Windows 7 has a wonderful feature - booting from the latest successful configuration. This option is available directly from the same menu where you can enter safe mode. To enter Safe Mode in Windows 7 you need to do the following:

How to enter safe mode in Windows 7. Method No. 1

If you need to boot immediately before turning on the computer:

How to enter safe mode in Windows 7. Method number 2

If you need to boot directly from the system:

Related Posts

There is also a safe mode in Windows 10, no matter how users deny it earlier versions OS. There is no point in entering it just like that, but in some situations it is very relevant and necessary. For example, a virus got into your computer and...