RF antenna input on BBK TV. How to set up digital television on your TV


So that you can watch on an analog TV digital channels broadcasting requires special equipment called a receiver, tuner or set-top box. BBK Electronics company in the region digital equipment succeeded. Offered on the market BBK TV set-top boxes decent quality and functionality. Receivers BBK not only receive DVBT2 standard signals, but can also record selected programs into memory for later viewing.

The main feature digital tv set-top box consists in the absence of the need, as for satellite TV, to worry about installing a bulky antenna or laying a cable. For this device to work, it is enough small indoor antenna and connecting the BBK set-top box to the TV.

While quantity available channels significantly less, limited to 20 terrestrial TV channels versus a couple of hundred channels for other solutions. But digital television broadcasting With the introduction of new multiplex equipment, their number will eventually expand, HD and even 3D TV channels will appear.

BBK digital tuners are not inferior satellite receivers in functional terms:

  • high image quality;
  • ability to record program inclusion planning;
  • pause and rewind.

User reviews of the brand's models are mostly positive. Most often, a friendly, intuitive interface is noted. Users are satisfied fast switching channels, TV Guide (EPG) function), which prevents you from missing your favorite programs. The device’s ability to save videos and photos to small-capacity USB drives is noted, the quality playback in FullHD format.

Comparative analysis of popular BBK brand models

Given the variety of proposals, it is difficult to understand which model is better, so we present comparative analysis the most popular devices in the user environment.

Name Quality Format Inputs and outputs TV guide Tele-text

and subtitles

 Scheduler Time shift
BBK smp240hdt2 dvb t2 Full HD Antenna input and output, Eat Eat Eat Eat
BBK smp124hdt2 Full HD Antenna input and output, Eat Eat Eat No
BBK smp002hdt2 Full HD Antenna input, No Eat Eat Eat
BBK smp016hdt2 Full HD Antenna input and output, Eat Eat Eat Eat

The considered bibike consoles generally have similar functionality, the devices differs in some details:

  • external design, number and placement of communication connectors;
  • range of supported video and audio formats;
  • data flow rate
  • additional options.

Connecting and setting up the BBK TV set-top box

The method of connecting the device to the TV depends on the availability of the corresponding connectors on the TV receiver. Old TV can be connected via tulip cables through the component output of the set-top box (AV, CVBS). It is logical to connect a more modern TV receiver with an HDMI connector via HDMI cable through the corresponding port of the set-top box. If your TV does not have the connectors listed above, but there is a SCART port(in the form of a comb), you will need to purchase an adapter. Plug from room or remote antenna must be inserted into the antenna socket of the set-top box.

Rf out port on TV box can be used to transport analog signals to a TV. To configure the BBK prefix, you need to perform the following steps.

  1. Make sure that the set-top box is connected to the TV correctly.
  2. To plug digital receiver to the power supply and turn on the BBK set-top box without a remote control (there is a power button on the case) or using a remote control (if there is no power button on the case).
  3. When you turn on the receiver software for the first time, it will display a welcome window, prompt you to select the interface language, broadcast region, and define screen parameters.
  4. Next, to initiate a channel search, click the “OK” button.
  5. At the end of the search, the found channels are automatically saved.

If you need to reconfigure the device, go to the window initial setup possible after restoring factory settings. Path to the “Main Menu” mode → “Settings” → “Factory settings”.

The procedure for initial setup/reconfiguration of a digital tuner is described in more detail in the instructions for each specific model.

Ways to solve connection problems

During operation of digital electronics, malfunctions may occur. If the tuner does not respond to the remote control, the first thing you can try is to replace the batteries. If that doesn't work, the remote control may be faulty and will need to be replaced.

Crashes happen when The set-top box does not pick up channels. You can try the following solutions to solve the problem.

  1. Reboot the device (turn off the power and turn it on again using the power button on the device itself).
  2. Launch automatic search channels. This method may cause manual channel sorting to be reset. But arranging the channels in the right order is not difficult after solving the problem.
  3. If the first two options did not give desired result, you can restore factory settings and reconfigure the device from scratch. The sequence of pressing the buttons should be looked at in the manual for the specific model of the set-top box.

Advice! Before proceeding with the above steps, you should make sure that the receiver is not finding channels due to a software failure, and not due to problems at the local repeater.

If you want to listen to music in good sound on a computer (and there is no suitable speaker system), you can connect a home theater to it.

Equipment and accessories

What you might need if you want to connect a home theater

  1. Direct cinema equipment with an acoustic system.
  2. Computer with a modern audio card and motherboard.
  3. The wire. Its connectors: on one side there is a tulip, on the other there is a plug like for headphones.

How to connect bbk to a computer: method 1

An important point: acoustics directly into in this case You won't be able to connect it to a video card. Because you may need a special wire. However, in this case it is necessary to use an amplifier, which will replace the cinema itself. Using a wire with “tulip” and “plug” connectors, the amplifier and sound card are connected on one side, and the amplifier and computer are connected on the other. The speakers will be connected to the cinema. If desired, an active subwoofer can be used as an amplifier.

  1. At the very beginning, the wire connector, which is called “tulip”, must be connected to the sound computer card. The “out” connector is used for this.
  2. The other sides of the wire (white and red) must be connected to the player (cinema) itself into connectors of the corresponding color. The order of connection is not important here, it is important to connect the wires correctly. Otherwise, the sound will not be played.
  3. Next, the speakers are connected to the player. To do this, you also need to use special connectors (they are indicated by a special icon).
  4. Next, you need to configure it on the computer itself sound card. To do this, in the settings you need to select the item that corresponds to the number of columns. For example, 6CH Speaker for 6 speakers. You also need to select correct connection. It will not be a microphone or headphones.
  5. The cinema will be plugged in.
  6. You need to properly configure the cinema itself, or rather, find desired channel sound output. The desired sound level is also selected at the cinema itself.

Another way to connect a cinema to a computer is described in our article.

Second way

There is another way to connect a bbk cinema to a computer. It is worth saying that it is more correct from a technical point of view. But still, the first method is no less safe and will not harm either the computer or the cinema. In this case, the computer must have a special connector called “S/PDIF Out”.

To do this, you also need to first stock up on the appropriate digital audio cable. The connection process itself is quite simple: one side of the cable is connected directly to the video card via the S/PDIF Out connector. The second side of the cable is plugged into the cinema. Then everything is done as described in the first method.

When digital TV first appeared, there was a lot of talk around it, and a certain excitement arose. This is not surprising, because the signal quality of such TV is much better and, moreover, it is accessible to everyone. It can be connected to either modern TVs, and older models, using certain devices for this. Today, of course, there is both cable and satellite television However, digital TV remains no less popular among the residents of our country. It does not require special expenses and at the same time provides broadcasting of the main 20 channels. In this regard, you can find many different companies that offer their services for connecting and setting it up.


If you want to watch terrestrial TV channels, then you don’t have to pay anyone money to set them up; you can set them up yourself. Today we will look at how to set it up on a particular model.

What is digital television?

Before setting it up at home, let's understand what it is and how it works.

The essence of such TV is that the television image, as well as sound, is transmitted to a particular device using digitally encoded audio and video signals through certain channels. With this encoding, the signal is transmitted with minimal losses and has much best quality, how analog signal which is influenced by external factors.

On the other hand, it should be said that with digital television the TV channel will either work well or not work at all. This TV has no interference or average condition. The only thing is that if the signal is bad, then one or another of the 20 channels will turn off or slow down from time to time. To fix this you will need to rotate TV antenna, or directly to the TV, raise it higher, or replace it with another one.

General setup instructions

To begin with, you can consider how digital TV is configured on TVs with a built-in receiver in general. The differences usually lie only in the sequence of some actions and the names of the items.

To connect terrestrial digital television, you should:

  1. Connect an antenna to the TV;
  2. Press the “Menu” button on the remote control;
  3. Go to "Options" and select automatic setup;
  4. After this, a window will appear on your screen in which you will need to determine the signal source. Check "Cable" and click "Start";
  5. Next, another window will appear. Here, from the proposed signal sources, select “Digital” and again click on “Start”;
  6. After this, another window will appear in which you need to go to “Search Mode” and select “Full”.
  7. You will see columns that you will need to fill in with the following data and click the “Search” button:

Some models have a network search feature. If it is, then you do not need to enter data. It will be enough just to select the search mode and run it. After this, your TV will start displaying 20 free channels.

Setting up LG TVs

The menu and firmware on LG TVs with a built-in receiver may be different. It mainly depends on how modern model you have. If the TV is old, then you will have to buy a special device that will receive digital signal. However, despite this, the menu of each TV has similar items and characteristics.

In order to connect 20 digital channels terrestrial television you'll need:

  • Connect the TV antenna;
  • Go to “Options” through the menu;
  • Next you will see a list of parameters that can be changed;
  • In the “Country” item, select Finland or Germany;
  • Next, go to settings and select “Auto search”;
  • Next, you will need to select a connection method. From the proposed options, select “Cable”;
  • Next, a window will appear in front of you in which you need to go to the setup mode and enter the data indicated in the table above. After that, click "Start".

If you do everything correctly, your TV will start displaying 20 broadcast channels, as well as some radio stations that he manages to detect.

It is worth saying that LG TVs have auto-updates. This means that from time to time the TV itself will reset all found channels and search for them again. If you don't want it, just turn it off this function. To do this, you will need to go to “Settings” digital cable» and disable the auto-update feature.

In conclusion, it is worth saying that setting up a TV is quite simple.

Digital TV on Samsung

Setting up 20 TV channels on brand TVsSamsung with built-in receiver looks like this:

  • Connect the antenna;
  • Enter the menu using special button on the remote;
  • Go to the “Channel” section, which has a satellite dish icon;
  • On the side you will see a list of tabs, among which you should go to the “Antenna” tab and select “Cable” as the connection;
  • After this, open the “Country” tab and select “Other”;
  • As a result of these actions, a PIN code request will appear on your screen. Primordial pin code – 0000;
  • After you enter the PIN code, a window will appear in which you should select “Cable” as the signal source through the auto-tuning menu;
  • Next you should select fast mode search, automatic selection networks, as well as data from our plate and click on “Search”.

Once everything is completed, your device will begin to display all available 20 channels.

Philips setup

The actions for, in fact, do not differ from the actions described above. To do this, you should also connect the antenna, enter the menu, and then perform the following steps:

  • Go through the menu to the “Configuration” section;
  • In the window that opens, select “Install”;
  • After this it will be displayed extra menu. In it you must select the “Channel Settings” item;
  • Next, another auxiliary menu will pop up. Here you will need the “Automatic installation” tab;
  • After you get to it, a window will appear in front of you warning that the list of channels will be updated;
  • Click the “Start” button and in the new window select “Reinstall channels”;
  • Next you need to click on the “Country” item and set Germany or Finland;
  • After this, you will need to decide on the connection method. This is the “Cable” item;
  • Next you should make some more changes. To do this, click the “Settings” button;
  • In the window that appears, click “Baud Rate” and select 314.00;
  • Only after this should you click on the “Start” button and your TV will independently find and configure 20 over-the-air channels.

3. Confirmation will be required, click “OK”.


4. After which the tuner will reset the settings to factory settings.

5. Press “EXIT” and the main menu will appear.

6. Enter the “System Setting” section in the main menu to change the menu language.

7. Select the “Language Setting” section and click “OK”.

8. The language setting menu will open.

9. Change “Menu Language”, “Subtitle Language” and “Audio Language” from “English” to “Russian” using the left and right buttons on the remote control.

11. Press the “Menu” button on the remote control, the main menu will open. Then enter the “Install” menu item.

12. Select “Search for channels” and press “OK”.

13. Select the “Search Mode” line and use the left or right buttons to set the value to “Manual” instead of “Network”.

14. Enter following parameters:

  • Frequency 322000 Khz (dialed using the remote control channel buttons).
  • Flow rate 6750 KS/s (selected using the remote control channel buttons).
  • QAM 64 type (selectable by pressing the right or left button).
  • Turn on network search(selected by pressing the right or left button).

If the settings are correct, two indicators will appear in the lower right corner: “Signal Level” and “Quality”.

15. After the indicators appear, use the up or down buttons to move down to the bottom line “Start search” and press the “OK” button.

The receiver will automatically search for channels within 1-2 minutes.

16. A message will appear on the screen indicating the number of television and radio programs found. In order to save the programs, you must click the “OK” button.

After saving (channels), in order to exit, you must press the “EXIT” button on the remote control.

17. In the main menu, enter “Org. Channels".

18. By moving channels, arrange the channels in a sequence convenient for you.


1. Enter "Menu" and select "Factory Settings", click "OK".

2. Enter the password (the default should be 0000).

Then click OK.

4. Select your desired language.

5. The “Main Menu” will appear, select “Install” and click “OK”.

6. Select manual scanning and click "OK".

7. Enter the frequency: 322000 MHz (using the channel buttons on the remote control).
Flow rate: 6750 (selected using channel buttons on the remote control)
Modulation: 64 QAM (selectable with left and right buttons on the remote control)
Set “Network search” to “AVAILABLE” (selected with the left and right buttons on the remote control).

After correct input parameters a signal will appear.

Click “OK” and the tuner will find all channels and radio stations.

To save the channels, click “OK”.

8. Using channel editing, we arrange them in a sequence convenient for you.


1. Press on the remote remote control MENU button. The main menu will open. Use the left and right buttons to select “Channel Tuning”. Select the “Delete all channels” section.

2. Confirmation will be required. Click "OK".

3. The tuner will delete all tuned channels.

4. Select “Installation” in the main menu (using the left and right buttons).

5. Go down to the section “ Manual search» (using the up and down buttons).

6. Click “OK”.

7. Enter the frequency (using the channel buttons on the remote control)

  • Symbol rate (set by channel buttons on the remote control)
  • Cable: (selected with the left and right buttons on the remote control)
  • A signal should appear below.
  • Click "OK".
  • The tuner will find channels with the specified parameters.
  • To save the channels, click “OK”.

To search for other channels, select the next transponder using right button on the control panel. And enter other parameters for the next TV package.

8. After setting up all TV programs, go to “Channel settings” in the main menu to move to a sequence convenient for you.

Select a channel using the "OK" button and move it to a position convenient for you using the up and down buttons.


1. Press the "MENU" button on the receiver's remote control. The main receiver settings menu will appear on the TV screen.


1.1 By moving the keys up or down on the receiver remote control, you must select the menu line “SEARCH CHANNELS” and press the “OK” button.

2. Press the up or down buttons until we are in front of the “SEARCH OPTIONS” item in the right column of the menu and press the “OK” button.

3.In the “SEARCH PARAMETERS” menu, enter the parameters one by one:

3.1 Frequency 322000 Khz (selected using the remote control channel buttons).

3.2 Flow rate 6750 KS/s (selected using the remote control channel buttons).

3.3 QAM 64 type (selected by pressing the right or left button).

3.4 After entering the parameters, press the “OK” button and go to the previous menu.


4.Press the up or down buttons until in the right column of the menu we are opposite the line “AUTO SEARCH” and press the “OK” button

4.1 Confirm the action by additionally clicking the “OK” button.

5. Wait for the channel search to finish


1. Press the "MENU" button on the receiver's remote control. The main receiver settings menu will appear on the TV screen.

By moving the keys up or down on the receiver remote control, you must select the “INSTALLATION” menu line and press the “OK” button.

2. The INSTALLATION menu will open. By moving the keys up or down, you must select the “Factory settings” menu line and press the “OK” button.

3. After which the tuner will reset the settings to factory settings.

4. Enter the main menu.

5. Select Install and click OK.

6. Select "Search for channels" and press "OK".

7. The “SEARCH CHANNELS” menu will open.

7.1 Select the line “SEARCH MODE” using the up and down buttons.

7.2 Press the buttons to the right or left until the inscription Manual appears in the right column of the menu opposite the line “SEARCH MODE”.
At the same time, the following lines should become active (it will be possible to change parameters): 2-Frequency, 3-flow rate, 4-QAM type, 5-Network search.

7.3 Enter the parameters one by one:

7.4 Frequency 322000 Khz (selected using the remote control channel buttons).

7.5 Flow rate 6750 KS/s (selected using the remote control channel buttons).

7.6 QAM 64 type (selected by pressing the right or left button).

7.7 Turn on network search (selected by pressing the right or left button).

7.8 If the settings are correct, two indicators will appear in the lower right corner: “Signal level” and “Quality”.

7.9 After the indicators appear, use the up or down buttons to go down to the bottom line “Start search” and press the “OK” button.

8. The receiver will automatically search for channels within 1-2 minutes.

9. A message will appear on the screen indicating the number of television and radio programs found. In order to save the programs, you must click OK.

After saving (channels), in order to exit, you must press the “EXIT” button on the remote control.

10. In the main menu, enter “org. Channels".

11. By moving channels, arrange the channels in a sequence convenient for you.


1. Press the "MENU" button on the receiver's remote control.

2. The main receiver settings menu will appear on the TV screen. Select the item “Search for channels”

3. In the window that appears, select “Quick search”.

4. Enter the following parameters:
◦ Start frequency 346.0 MHz
◦ Transfer rate 6750 kS/s
◦ Search QAM 128-QAM
◦ Network Search Yes
Then select “Search”, the process of searching for channels will begin.

5. When finished, click “OK” in the window that appears and exit the menu with the “EXIT” key

4.In the main menu you need to go to the “Timer” item to set the time

5. Setting up CATV. Go to CHANNEL.

6.Broadcast type, select CABLE TV.

7.Select the search option “DVBC manual search”, and set the following parameters:

    Modulation: 64 (QAM) (QAM type)

  • Your TV is set up.

1. Photo of the TV remote control on which the settings will be made.

2.To enter the TV menu, you must press the MENU key on the remote control. Depending on the model, the menu interface may differ, but general meaning and the procedure remains relevant. To do this, go to the SETTINGS item (confirm the selection with the “OK” key on the remote control)

3. Go to the CHANNEL section. Specify the antenna type DVB-C. Go to the Automatic tuning section

4. Scan type Manual DTV setup. Set the following parameters:

    Frequency: 322,000 (KHz) (322 MHz)

    Bitrate: 6750 (KS/s) (bit rate, symbol rate)

    Modulation: 64 (QAM) (QAM type)

  • Click SEARCH

6.Your TV is configured. By pressing the “EPG” key, a menu will open, electronic program transmission


1. Photo of the TV remote control on which the settings will be made.

2.To enter the TV menu, you need to press the MENU key on the remote control. Depending on the model, the menu interface may differ, but the general meaning and procedure remains relevant. To do this, go to the SETTINGS item (confirm the selection with the “OK” key on remote control)

3.Before you start setting up channels, you need to change the language version of the TV menu (if necessary). To change the language, you need to go to the “Settings” item. (to do this, you need to select this item and confirm the action with the “OK” key on the remote control).

4.To set up TV channels, you need to enter the CHANNELS section.Then select manual setting TV.

5.You need to select DVС TYPE and set the following network parameters:

  • Frequency: 322,000 (KHz) (322 MHz)

    • Bitrate: 6750 (KS/s) (bit rate, symbol rate)

    Modulation: 64 (QAM) (QAM type)

Your TV is set up.


1. Photo of the TV remote control on which the settings will be made.

2.To enter the TV menu, you need to press the MENU key on the remote control. Depending on the model, the menu interface may differ, but the general meaning and procedure remains relevant. To do this, go to the SETTINGS item (confirm the selection with the “OK” key on remote control)

3.Before you start setting up channels, you need to change the language version of the TV menu (if necessary). To change the language, you need to go to the “SETUP” item. (to do this, you need to select this item and confirm the action with the “OK” key on the remote control).

4.To set the time, you need to go to the TIME SETTING item.

5.To configure channels, you need to go to the CHANNEL section and select Manual search

6.Select:

  • Country Russia.
  • DTV+ATV mode

7.Specify search parameters in accordance with:

    Frequency: 322,000 (KHz) (322 MHz)

    Bitrate: 6750 (KS/s) (bit rate, symbol rate)

    Modulation: 64 (QAM) (QAM type)

1. Photo of the TV remote control on which the settings will be made.

2.Enter the settings menu by pressing the button on the remote control

3. By pressing the “up” and “down” keys, go to the “Channels” section. The connection to TV should be indicated as Cable. If you have an Antenna, try pressing the “Source” key on the remote control and select DTV or DVB-C. If, when you select this item, there is no cable in the options, or the TV does not prompt you to select a signal source at all, your TV may not have a tuner DVB-C standard

4. Select the “Manual tuning of digital channels” section using the “up” and “down” keys, and confirm the selection with the “OK” key. Next, select the “Digital” option.
5.Next you need to specify the search parameters Search type:

  • Network search

    • Frequency: 322,000 (KHz) (322 MHz)

    Bitrate: 6750 (KS/s) (bit rate, symbol rate)

    Modulation: 64 (QAM) (QAM type)

    Click "Start"

7.The TV will ask you to confirm the search, select “OK”. Auto search has started.

1. Photo of the TV remote control on which the settings will be made.

2.To enter the TV menu, you need to press the MENU key on the remote control. Depending on the model, the menu interface may differ, but the general meaning and procedure remains relevant. To do this, go to the SETTINGS item (confirm the selection with the “OK” key on remote control)

3.Before you start setting up channels, you need to change the language version of the TV menu (if necessary). To change the language, you need to go to the “LANGUAGE” item. (to do this, you need to select this item and confirm the action with the “OK” key on the remote control).

4. Menu language must be specified as “Russian”. Preferred audio language must be specified as “Russian”. Preferred audio language 2 must be specified as “English or Russian”. Then press the “MENU” key to go back.

5.In the main menu you need to go to the “Timer” item to set the time

6.Go to the clock item.

7.In the menu that opens, specify the time and date.Then press the “MENU” key to go back.

8.You need to go to the Settings menu

9.In the setup menu:

    The country should be “Russia”;

    Tuner mode “Cable TV”;

    Go to Channels (by pressing the “OK” key on the remote control)


10.In the Channels menu (go to Manual cable TV setup by pressing the “OK” key on the remote control)


11.In the search menu you need to specify the Country “Russia”

13.Frequency: 322,000 (KHz) (322 MHz)

Bitrate: 6750 (KS/s) (bit rate, symbol rate)

Modulation: 64 (QAM) (QAM type)

Go to the Search item and press the “OK” key on the remote control.

You need to wait until the TV setup is completed.

14.Pressing the “Guide” key will open the menu of the electronic program guide.


1. Photo of the TV remote control on which the settings will be made.

2. Select a language. Using the remote control (hereinafter referred to as the RC), use the ˂/˃/ ˄ / ˅ arrow buttons to select the “Russian” language. Press the center button to go to the next page.

3. Select a country. Using the remote control using the ˂/˃/ ˄ / ˅ arrow buttons, select the country “Russia”. Press the center button or the right ˃ arrow to go to the next page.

4. Select a location. Using the remote control, use the ˂/˃/ ˄ / ˅ arrow buttons to select the “Home” location. Press the center button or the right ˃ arrow to go to the next page.

5.Begin setup. The screen will display the message “Start Auto Setup?” Press SKIP, then select manual setup options

6. Select the connection type. Using the remote control using the ˄ / ˅ arrow buttons, select the TV connection type “Cable”. Press the center button or the right arrow˃ to go to the next page.

7. Setting up CATV.

Using the remote control, use the ˂/˃/ ˄ / ˅ arrow buttons to select the following values:

Scan Type → Full Scan

Frequency: 322,000 (KHz) (322 MHz)

Bitrate: 6750 (KS/s) (bit rate, symbol rate)

Modulation: 64 (QAM) (QAM type)

Using the remote control, go to the “Start” button, then press the center button or the right arrow ˃ to go to the next page.



9.Watching KTV.

Digital TV is set up!

To view the list of channels, press the “home” button and use the ˂/˃/ ˄ / ˅ arrow buttons to select the “Digital TV” tab.

Next to the TV channel number you can see its name and the program running at that moment.

If your TV model provides for the reception of digital channels, but there is no “DTV MENU” item, then first select another country - France, Switzerland, Sweden or Finland.

1. Press the button - "DTV"
2. click - "DTV MENU"
3. select - "Installation"
4. select - “Manual tuning” Frequency: 322,000 (KHz) (322 MHz)

Bitrate: 6750 (KS/s) (bit rate, symbol rate)

Modulation: 64 (QAM) (QAM type)
5. click - "OK"
Setup takes approximately 5-10 minutes.

Since not all SONY models are equipped digital tuner for cable TV (DVB-C) You need to check the model of your SONY TV.
Models equipped DVB-C tuner are marked KDL-**EX*** or KDL-**NX*** - for example KDL-32EX402R2 the first 3 letters in the model name (KDL) indicate that the TV is “digital”. In models KLV-**BX***, etc. There are no DVB tuners.

1. Press the "MENU" button (for some models it is called "HOME" on the remote control (hereinafter referred to as the remote control). This button is usually blue.
2. Select the “Settings” item.
3. Find the “Digital Configuration” menu in the list of settings and enter it
4. Select "Auto search" digital stations"
5. A source selection window will open - select the TV connection type. Select "cable"
6. In the selection of scan type - select the "full scan" mode
6.1 Or select "Manual"
6.2 Next, enter the Frequency: 322,000 (KHz) (322 MHz)

Modulation: 64 (QAM) (QAM type)
6.3 Leave the access code as “Auto”. Next, enter the symbolic rate 6750

7. Click "start"
Wait until the TV finishes searching for channels.

Pay attention to the bottom of your TV's OSD menu. The bottom menu bar displays hints on which remote control buttons to perform certain actions in the TV menu.

1.Turn off the TV and install the module conditional access. Turn on the TV. Go to the menu. Select the language Russian.

2.Go to the DTV manual setup tab and click OK

3.Enter frequency 322,000 KHz, modulation 64, symbol rate 6750

4.After pressing the OK button, a search will begin, as a result of which the channels should be found.

2.Indicate the country Finland or Germany

Bitrate: 6750 (KS/s) (bit rate, symbol rate)



Auto Channel Update: Off


1. In order to set up digital TV channels for the vast majority of Samsung models, press the “Menu” button on the remote control, the TV menu will open in which you will need to select the “Channel” section (icon Satellite antenna). In the “Antenna” tab, specify the connection type “Cable”. Go to the “Country” tab and select the “Other” option. The TV will ask for a pin code, if you have not changed it, you will see 0000

2. Go to “Auto-tune” Signal source: Cable, Choose the type of channels at your discretion, you can find only digital channels, or digital + analog

3. Specify Search Mode: Quick, Network: Auto, Ident. Networks:-----------, Frequency: 322 000 (KHz) (322 MHz) Bitrate: 6750 (KS/s) (bit rate, symbol rate) Modulation: 64 (QAM) (QAM type)

4.As a result of the search, you should find channels


1.In order to set up digital TV channels high definition for the vast majority of Philips models, press the “Menu” button on the remote control, you will see the TV menu in which you will need to select the “Configuration” section

2.Select the Installation tab. After clicking OK, you will be taken to the second menu field, then go to the Channel Settings tab. After clicking the “OK” button, the third part of the menu will open, where you need to select “Automatic”. Installations". Next you will see a message about updating the channel list, click “Start”

3.Select "Reinstall Channels"

4.In the Country section, you must select Finland, but if this country is not in the proposed list, then select Germany

5.Since you are connecting to digital television via cable network DVB-C, you must select “Cable”

6.Before you start searching for channels, select “Settings” to manually correct the search parameters

7.Install manual mode transmission speed. In the tab, change the transmission speed manually from the control panel to the desired one. In some TV models, the flow rate is indicated in the “Character 1” tab 6750 “Character 2” is left at 0.

8.Now set the network frequency to manual mode and enter the network frequency 322.00 from the control panel

9.After clicking the done tab, you will again be taken to the channel launch menu, now you can start scanning

10.If you did everything correctly and saved all the changed parameters, then during the search your channels will be detected.

1. In order to set up high-definition digital TV channels for the vast majority of LG models, press the “Menu” button on the remote control, the TV menu will open in which you will need to select the “Options” section

3.Now go to the “Settings” menu, “Auto search” item and specify the method of connecting to the TV “Cable”

4.Now in the window that opens, go to “Settings” and enter the following parameters:

Search type:fast, Frequency: 322 000 (KHz) (322 MHz)

Bitrate: 6750 (KS/s) (bit rate, symbol rate)

Modulation: 64 (QAM) (QAM type), Network ID: auto


5.If you did everything correctly and saved all the changed parameters, then during the search you will find channels and radio stations


6.An important feature of LG TVs is the “ Automatic update channels." It must be disabled, otherwise the TV will periodically reset the channel list you have configured.

Go to “digital cable settings”:

Auto Channel Update: Off


1. In order to set up high-definition digital TV channels for the vast majority of LG models, press the “Menu” button on the remote control, the TV menu will open in which you will need to select the “Options” section


3.Now go to the “Settings” menu, “Auto search” item and specify the method of connecting to the TV “Cable”
An important feature of LG TVs is the “Automatic channel update” function. It must be disabled, otherwise the TV will periodically reset the channel list you have configured. Auto Channel Update: Off



4.Now in the window that opens, go to “Settings” and enter the following parameters:

Search type:fast, Frequency: 322 000 (KHz) (322 MHz)

Bitrate: 6750 (KS/s) (bit rate, symbol rate)

Modulation: 64 (QAM) (QAM type), Network ID: auto



5.If you did everything correctly and saved all the changed parameters, then during the search you will find channels and radio stations





3. Select the source “Cable TV”


4. Operator “Other operators”


5. Enter the following parameters: Use the left/right arrows to select the scanning type, name “Fast” Frequency 346000 kHz Symbol rate, Modulation, Network ID “Auto” Check the box for “Skip encrypted channels and press “OK”


6. Check the box for “Digital only” and click “Run”. The TV setup will begin. When finished, exit the menu. Your TV is set!


1. Press the “HOME” button on the TV remote control.

2. The main menu will appear on the TV screen. Select “Settings”

3. In the window that appears, select “Broadcast”.

4. Select “Auto-tuning options”

5. Select “Auto Configuration”




6. In the channel scanning menu, set the following parameters:

Antenna “Cable” Channel type “Digital” Operator selection “Other” Search mode “Network”

7. Start Scanning. Wait until the search is completed.

6. Enter the following parameters: Scan type Name Quick Chat setting Manual. Frequency 346 MHz Setting the network ID “Auto” Then select “Start”, the channel search process will begin.

7. When finished, click “Continue”, the setup is complete.

Press the "HOME" button on the TV remote control.

The main menu will appear on the TV screen. Depending on version operating system menus and items may differ, below are two examples various options menu. Option 1. Scroll down the menu and select the “Settings” → “Settings” section

Option 2: Scroll down the menu and select “Settings” → “System Settings”

In the window that appears, select “Channel settings”.

Select “Digital.” Configuration"

In the “Digital Configuration” section, select “Digital Setup”

In the next menu, select “Auto search for digital channels”

TV connection type “Cable TV Other”

Next, confirm searching for channels. Wait for the procedure to complete and exit the menu. Your TV is tuned!

3) Then you need to point the TV and receiver remote controls at each other and press the programmable button on the TV remote control once, in our case the TV power button. After this, the “SET” button indicator will blink twice and turn red.

4) To exit the programming mode, you need to press the “SET” button again, after which the indicator will turn off.

To program the remaining buttons you need to make previous actions from 1 to 4 points.

Digital receivers Topfield
To view the TV Guide, you must press the EPG button on the digital receiver control panel. Will open information window. Information about the number and name of the TV channel will be shown at the top. Below is a table, on the left side of which the broadcast time of the TV show is indicated, and in the center - the shortened name of the TV show. You must wait a few seconds for the full list of programs to appear. By moving through the list by pressing the up and down buttons on the remote control, you can view all programs for the current day, while reading their full name and short description in the lower right corner. The lowest window serves as an assistant for working with the TV Guide. By pressing the indicated buttons, it is possible to: change the TV Guide type, move to the next days, go back, view the TV Guide of the next and previous channel only for this digital package, while simultaneously viewing the program you are interested in in the upper right corner. To close the TV Guide, you must press the EPG or EXIT button on the remote control.
Digital receivers Signal
To view the TV Guide, you must press the EPG button on the digital receiver control panel. An information window will open. At the top it will be shown supporting information about using EPG. Below is information about the date, name current program and a brief description of it. It will load within a few seconds full list programs of this digital package. After downloading, select the channel we are interested in and click OK. A table will appear, on the left side of which information about the broadcast time of the program is indicated, and on the right side - short name channel. By moving through the list by pressing the up and down buttons on the remote control, you can view all the programs, while reading their title and brief description in the lower right corner, while simultaneously viewing the program you are interested in in the upper right corner. To go back, press the OK button on the remote control. To close the TV Guide, press the EXIT button on the remote control.
INTEK digital receivers
To view the TV Guide, you must press the EPG button on the digital receiver control panel. An information window will open. Information about the number and name of the TV channel will be shown at the top. Below is the name of the current program and its brief description. In the table that appears at the bottom of the screen, a few seconds after entering the EPG, the full list of programs will be loaded. To view it, you need to move by pressing the button on the remote control to the right and left. In this case, information about the name of the program and its brief description will be displayed in the upper left window, and the transmission time will be displayed under the upper right window of the program you are watching. To close the TV Guide, press the EPG or Back button on the remote control.


With the widespread use of modern television, there has been a stir and, accordingly, many questions. how to set up digital television. The reason for its popularity is the variety of channels in terms of direction, quality, language, type of content, etc. Due to the lack of information on setting up digital TV, companies have appeared like mushrooms after rain, charging fees for these manipulations. You don’t have to pay at all, you can actually achieve the goal on your own.

How to set up digital television on a TV - general provisions

Mostly all the ways to set up reception digital television they use approximately the same scheme, but due to the diversity of manufacturers, the actions may differ slightly, but their logic is similar. In order not to get confused in all the sequences, it is worth applying the algorithm directly to each TV model. Thanks to logic and intuition, you can correctly configure the settings on almost every TV model using the instructions provided.

  1. Take the remote control and expand the menu;
  2. Proceed to the “Options” item;

  1. Next, you need to activate “Auto Configuration”. With this action, a window appears containing information about signal sources, it can be cable or antenna signal. In our case, we need to select a cable;
  2. At the end of the operation, information about the quality of signal reception should appear in a new window, here you should select “Digital”, then click “Start”;
  3. The final setting point is “Search mode” and select the method for detecting channels. The proposed fields must be filled in with information. The frequency is 314 MHz, the speed is 6875 kS/s, and the modulation is 256 QAM.

More advanced TV models allow you to perform a network search, which will do everything on its own necessary actions. When the desired method for detecting TV channels is selected, you need to click on “Search”.

If this instruction is not effective, you should use a detailed algorithm for LG TVs. The technique is relevant for almost all models of the manufacturer.

  1. From the remote control go to the Menu;
  2. Click on “Options”;
  3. In the “Country” category, change the checkbox to Finland or Sweden;

  1. Then go to the “Settings” category and launch “Autosearch”;
  2. You need to enter a search method in the fields, usually this is enough fast type, frequency - 298 MHz, modulation - 256 QAM, symbols - 6952, ID - auto;
  3. If everything is done correctly, then during the search a number of TV channels will be displayed;
  4. Manufacturer LG integrates into the system automatic system search and update TV channels. This function can be inconvenient as the prepared list will be reset regularly. To prevent this phenomenon, be sure to go to the settings for connecting via cable and turn off “Auto channel update”;

  1. For convenient sorting, you need to remove the check mark from auto-numbering in the “Cable” section in “Autosearch”.

Now let’s look at the Samsung method, because the manufacturer is one of the most popular in the industry. The actions are like:

  1. Press Menu on the remote control;
  2. Next, go to the “Channel” category (there is a satellite dish on the icon);
  3. On the right you need to select the “Antenna” option, and in the type field - “Cable”;

  1. Now in the “Country” section you need to set “Other”, now you will need to enter a PIN code, by default 0000;

  1. Go to the “Auto-configuration” menu and specify the source of the signal – “Cable”;

  1. You need to specify the parameters, they correspond to the data in the first one, general example articles, and click “Search”;
  2. Now the TV will find all TV channels.

How to set up digital television on Smart TV

Digital television: how to set up channels on a TV with Smart function let's look at Samsung example. The action is performed fairly standardly, but there are some differences.

  1. Go to the “Channel” section in the Menu;

  1. Click on “Country”, you may now need to enter a PIN code, by default 0000, 1111 or 1234;
  2. Follow the "Other" section;
  3. Then, step back, select “Cable search options”;
  4. Standard parameters are now being introduced;

  1. Again you need to go to “Auto Configuration”, here select the “Cable” source mode;
  2. You need to activate the “Digital” section;
  3. Using the search mode, select “Network” and activate the setting.

All methods allow you to create a high-quality connection to digital TV channels and find the maximum available quantity interesting programs. Despite the lack of data on devices from Toshiba, Philips and others, the connection method is no different.

If you have any questions about the topic " detailed instructions on setting up digital television", then you can ask them in the comments


if(function_exists("the_ratings")) ( the_ratings(); ) ?>


2024 gtavrl.ru.