Adapter for connecting a hard drive via USB. How to properly connect a hard drive from a computer to a laptop via USB

Facebook

Hard drives with a sata interface are still the most capacious storage devices on the market. They are ideal for backing up information as well as for transferring large volumes data when the speed of the Internet connection or the capacity of devices with Flash memory is not enough.
However, stationary hard disks, installed inside the computer case, are designed for the sata interface, and are connected directly to the motherboard. This method is associated with several difficulties, moreover, it is impossible on laptops, while connecting a sata hdd via usb is no problem to any modern PC.

Let's talk a little in Russian about computer terminology. Sata is the name of the most common interface for hard drive controllers (hard drives, hdd). Previously, the ata (ide) standard was also used, but it is now considered obsolete. A controller is a device that controls the drive. Usually it is located directly on the computer motherboard, respectively, for physical access it requires disassembling the PC case. But in many cases this is redundant, and laptops do not have regular funds for connecting additional hard drives.

However, these difficulties can be solved by connecting the HDD via a USB port (English: universal serial bus - that is, “universal serial bus”), which is equipped with any modern PC. How to connect sata hdd via usb? This can be done using special external sata controllers (adapters) that convert sata signals to usb.

Since you can connect a hdd via USB to any computer, the method is universal. In particular, it allows:

1. Use HDD on a laptop, net-top or all-in-one PC

Many modern users prefer various types of portable or compact computers, for example, laptops. Other popular form factors are mono-blocks (the system unit and monitor are combined into one device) and net-tops (small system blocks the size of a thick book). The advantages of these types of PCs are obvious: they are easy to transport, they make less noise, take up little space, and so on. But their compactness completely excludes the installation of new devices inside the case. Owners similar computers An external USB controller can be useful for copying large amounts of information and creating backup copies, since connecting sata hdd via usb is the only way using a sata disk in such a system.

2. Connect the drive without disassembling the desktop computer case

With a USB controller, you don't have to disassemble your computer case to installing hard disk. This will save you from unnecessary operations and simplify the process of copying information. Also, an external controller is indispensable in cases where it is not possible to remove the casing: absent necessary tool, the system unit is under warranty, or it is a sealed computer in the organization, which is prohibited from opening.

3. Connect old hard a disk with an outdated ata (ide) interface to a modern computer, on mother card which there is no controller for this interface

The presence of an ata (ide) controller on modern motherboards is rare. But what if you need to copy some information from an old hard drive, for example, ten years ago? There are ATA controllers that are installed inside the case, but we recommend using a USB adapter for these purposes, since connecting a hdd via usb to copy information from an old device is easier and more convenient than using an installation additional component to the motherboard.

Types of adapters that allow you to connect hdd via usb

Exists a large number of manufacturers producing external controllers for drives, but the variety of models can be divided into two types:

1. External box
External boxes are a special case into which a sata hard drive is placed. Such devices are largely designed for constant use. For example, when you need to increase the amount of free information on a net-top. External boxes allow you to secure the hard drive with bolts for reliability and close it with a protective cover. Accordingly, frequent replacement of the drive is not provided. An example of such a form factor is the DEXP BS-U35YA U3 model.

2.Adapter
This design does not provide for fixing the drive in the housing. Adapters are used for short-term use: for example, when you need to connect a hard drive to a laptop, copy necessary information and turn off. This form factor is more compact, which is convenient for transportation. It is better suited for frequent changes of connected drives (for example, in computer services or in departments technical support). Also, unlike external boxes, which are designed for one type of interface, adapters can provide the ability to connect hard drives of different standards: 2.5”, 3.5” sata and ide (for example, the AGESTAR FUBCP model).

How to properly connect sata hdd via usb adapter

Connect the hard drive to the adapter.
Connect the power supply to the drive.
Connect the power supply to a 220 V network.
Connect the adapter to the PC's USB port. The operating system must detect the new device and provide access to the drive partitions.

Disconnection procedure

Use the " safe shutdown devices" in operating system to stop the disk.
Disconnect the adapter from the PC.
Disconnect the power supply from the 220 V network.
Disconnect the hard drive from the adapter.

The correct procedure for connecting and disconnecting ensures the safety of the drive and the information on it.

Then you know it takes a lot of time. You need to turn off the computer, remove the side cover, secure and connect the hard drive. And if the hard drive is connected only for a short period of time (for example, to copy files), then you don’t want to do that much work.

Fortunately, this problem can be solved with via USB interface. In this article you will learn how to connect a hard drive via USB.

Method No. 1. SATA- USB adapter.

The simplest and cheapest way through the interface is a special adapter. This adapter looks like a USB cable with a small box at the end. On the side of this box there is a connector for connecting a SATA drive.

When choosing a SATA-USB adapter, you need to pay attention to whether you are using extra food from an external adapter. Because if the SATA-USB adapter is powered only via USB, then it will not be able to work with large drives.

Method number 2. Pocket for hard drive.

The hard drive pocket is a small case into which you can insert your hard drive. There is a connector inside this case and a USB interface outside. HDD pockets give them some protection, but they are not as compact as SATA-USB adapters. Plus, they cost significantly more.

Other than that, the pockets limit you to the form factor of the hard drive you can attach. In other words, if you have a pocket for 2.5-inch hard drives, then you won’t be able to use it to connect a 3.5-inch drive.

Method number 3. Docking station for hard drives.

Another option is a hard drive docking station. A docking station is a stationary device that is used to connecting hard disks to the computer. Docks differ from pockets in that they have an open design. Thanks to this, connecting a hard drive to a docking station is much easier than connecting to a USB pocket.

In addition, docking stations are more versatile; in most cases, they can be used to connect both 2.5 and 3.5 inch hard drives. There are also docking stations for multiple hard drives.

The amount of permanent memory on computers has never been superfluous. Modern films can weigh up to 20GB, games up to 50, songs up to 2GB, but there are sizes even larger. The cheapest and effective type Today's memory is the hard drive. Let's find out how to connect second hard disk to computer with cable SATA or IDE, so that you don’t have to be afraid that tomorrow you won’t be able to download your favorite game or copy a couple of dozen movies from the hard drive that a friend brought.

First, you will need to master the theory in order to understand what actions need to be performed at one time or another.

Types of hard drives

Hard drives can be external - when you connect the hard drive via a USB cable - and internal, which are located directly in the computer or laptop itself. Therefore, if you need to connect a hard drive inside your computer or connect a new one external drive to your computer or laptop, then find the corresponding title in this article.

On USB type, I’ll go into more detail. IN modern computers There are two main types of USB ports/versions: USB 2.0 and 3.0. Hard drives supporting version 3 of the port are approximately 7 times faster than those supporting port 2.0. But before you buy a USB 3.0 hard drive, make sure that you have such a port on your computer or laptop.

It's easy to check, third USB version indicated in blue, but sometimes in red. It depends on the manufacturers. This is what they look like:

If your computer does not have such a port, then you will have to be content hard drive with support for USB 2.0 port. This check must be done! So that after the purchase you don’t get upset that your device doesn’t work with this or that technology.

Also when buying hard disk, pay attention to the speed of writing and reading data from the disk. If you buy a hard drive with poor specifications, you will wait longer when working with the drive, for example, when copying.

How to See a New External or Internal Hard Drive in Windows

So, you bought a hard drive, came home and happily connect it to your computer or laptop. But it's waiting for you constant problem problem that users encounter - the hard drive is not seen by Windows. It seems that everything was done correctly and even the indicator is on, which tells you that there is power, but the computer shows that there is none.

This situation is normal! To resolve this issue, you need to go to Computer Management. To do this, click on “Computer” right click mouse and select "Manage".

Now select “Disk Management” on the left. After a while, information about the drives that are connected to the computer will appear on the right. If your portable hard the disk is connected and the indicator is on (if any), then in this list there will be new hard disk. Next step: right-click on the hard drive and select “Format”.

Click OK. After this, the formatting process will occur. At the end of the procedure, your hard drive should appear in your computer or laptop.

I think the above information has completely explained how to connect a second hard drive to your device. Now let's find out the procedure with the internal hard drive.

Internal hard drives

In order to understand how to connect a second hard drive inside the computer, you need to remove the left cover system unit(looking at the front of the case). Usually it is held on by two bolts at the back of the case, but there are more. You may need a screwdriver to unscrew them, although very often they can be easily unscrewed with your fingers. Once you've removed the case cover, it's time to connect the hard drive itself. Don't forget to turn off the computer and remove voltage from the power supply by moving the button to back cover to position “0” and removing the power plug from the socket!

There are two connection types for hard drives: IDE and SATA. The IDE bus became obsolete in the early 2000s, so we will not consider this type of connection in detail. But the information below will also be useful for owners of these hard drives. I'll just say that hard drives With this connection there is a small jumper that helps the system determine which hard drive is the main one and which is the secondary one. On additional disk the jumper must be removed. Next, place the hard drive in the dedicated bay where you already have your primary drive installed and secure it with bolts.

Attach the IDE cable to the motherboard and to the hard drive:

Here he is:

For the hard drive to start working, connect the cable from the power supply to it. This is what it should look like:

Your second drive is now ready to go. You can safely start your computer and rejoice additional memory. If the computer does not see the hard drive, then follow the formatting procedure that I described at the very beginning of the article.

SATA drives preferable to use, as they have more high speed transmission of information, consume energy more economically and contribute to a longer service life of the hard drive. However, before purchasing such a drive, make sure that your motherboard has the appropriate connectors. They look like this:

The installation procedure for such hard drives is similar to IDE drives: insert the drive into the basket (system unit) and secure it with bolts. Now connect the SATA cable to the motherboard and it should also be connected to the hard drive. And so that the disk can work, connect the power.

Please note that the power connector is different from the one we connected to the IDE drive. But don't worry if you don't have such power connectors - there are special adapters that will help you power your new hard drive. They are inexpensive and connect quickly.

There is nothing more to say about how to connect a second hard drive to a computer. The main thing is to be careful with fragile components and do not forget to turn off the power to the system unit, the computer will do the rest itself. Well, or you help him! 😉

Perhaps you have an unwanted hard drive, removed from an old computer or laptop, that's sitting around collecting dust. If yes, then it will require very little investment to turn it into a detachable portable USB drive 2.0 or 3.0. Find out how.

Old laptop disk or desktop computer not very suitable for connecting to new equipment - of course, it does not reach the speed and capacity of the new drives that are connected to the computer. However, you can insert the old disk into a special case (adapter) and turn it into a portable USB drive.

Hard drive adapter

A special adapter is not just a piece of plastic - it includes a set of corresponding inputs and is an adapter for USB. Thanks to it, the hard drive, which is designed to be connected to the motherboard via the appropriate connectors (IDE or SATA), can be connected to USB port, that is, make it portable.

The prices for adapters are quite reasonable, on average about 1000 rubles. Also, the cost depends on the USB interface - an adapter with USB 2.0 will be cheaper for USB 3.0 (the difference is in data transfer speed).

Types of hard drives by interface

The adapter itself is not universal and needs to be selected suitable model for a specific drive. You should pay attention to the size of the drive (2.5″ or 3.5″), as well as the cable and power cable (ATA/IDE lub SATA).

2.5″ drives are much thinner and are mostly used in laptops. They can be connected via an ATA/IDE cable or a SATA cable.

3.5″ drives are slightly thicker and are usually installed in desktop computer. Also divided into ATA/IDE and SATA.

Sometimes there may be certain combinations- the new connector can be connected via the controller to the “old” motherboard (SATA / IDE). Definition of hard disk is key point, because you need to select the appropriate pocket (adapter) for the given size and interface of the drive.

How to choose the right adapter

When choosing an adapter, you should study the properties and find correct model, which is suitable for the method of connecting the hard drive and its connector. Below is an example of randomly selected USB adapters for various types hard drives.

2.5″ SATA: NATEC Rhino 3.0;
2.5″ IDE: Logilink 2.5;
3.5″ SATA: ITEC MySafe Advance 3.5;
3.5″ IDE/ATA: PRO-TECH 3.5;
3.5″ IDE / SATA: Tracer 731.

Installing a hard drive into the adapter

Installing a hard drive into the adapter is not difficult. Depending on the model, it may vary slightly and usually takes no more than a minute. Place the drive into the adapter housing, and then connect the wires to the appropriate connectors.

Connection features

Depending on the adapter model, interface and type of hard drive, there may be one or two USB cables on the outside. A USB cable is used to connect to a computer port, and a second one may be required for additional power.

When connecting via USB cable the hard drive should be immediately detected by the system and available for data transfer.

InstComputer.ru

How to connect a hard drive via USB

To install a hard drive in a computer, you need to perform a number of procedures to install it, but connecting a hard drive via USB is quite simple, which in turn is an advantage, it is as simple as inserting a USB flash drive.

There are several ways to connect a hard drive to a computer via USB and like this:

Method number 1. Connecting a hard drive using a SATA-USB adapter.

In my opinion this is one of the simplest and convenient ways connections. Looks like this adapter like a USB wire with a small box at the end that contains connectors for connecting a SATA drive to a computer.

When choosing this adapter, you should pay attention to the fact that it has additional power from an external adapter. Otherwise, if the SATA-USB adapter receives power only via USB, it will not work with drives big size.

Method number 2. Use an external HDD box 2.5 inches or 3.5, depending on your drive.

External box HDD is something in the form of a case for your hard drive, inside it has SATA connector, and from outside USB interface to connect. Although the external box provides some protection for the hard drive, it is still not very convenient to use due to its size, unlike a SATA-USB adapter, and it costs much more.

In addition, this adapter limits you in using the size of your drive, that is, if you have an external HDD box for a 2.5-inch drive, then you will not be able to use a 3.5-inch hard drive in it; for this you will have to purchase another one.

Method No. 3. Using a docking station for HDD.

A docking station for HDD is a stationary device for connecting a hard drive to your PC. Has an advantage over external box the fact that it has an open design. Connecting your hard drive to the docking station is easy by simply inserting it into the device.

In addition, you can purchase a universal docking station that allows you to connect 3.5-inch and 2.5-inch drives, which is very convenient. Also, a docking station for HDD can be used for several disks at once.

I also bring to your attention a video from one of the site’s readers on how to connect a hard drive via USB

seohotmix.ru

How to connect a hard drive via USB?

To access the contents of your hard drive via USB from a PC or laptop, you will need a special device - an adapter. Connection is not difficult, the main thing is availability special device. There are several types of devices that allow you to connect the hard drive (hard drive, HDD) of a desktop computer or laptop to USB and open its contents. Here are the two most popular: a universal USB controller (for example, AGESTAR FUBCP) or a case adapter (SATA External case, ITEC MySafe Advance and others).

Which one should you choose? Depends on the goals you have in front of you. If opening the hard drive is a one-time operation and is only necessary to copy valuable information, then you can use the first option. For those interested, read about where the space on the hard drive disappears.

In China you can buy the following devices that are built-in instead of a laptop disk drive:

There are also combined options with complete set(adapter, cord, power supply).

You can buy and see the description at this link: ru.aliexpress.com/adapter

The advantages of the first one are that such a device is cheaper than a case adapter, and often supports several types of connections (SATA, IDE). However, the use regular hard drive It is problematic to use it as a portable drive, since it will not be protected by anything.

The second option is a case adapter, which is specifically designed to turn a hard drive into a portable memory device with a sufficiently large capacity, since the case will reliably protect against dust and mechanical damage. But at the same time, the versatility of the device suffers: before purchasing, you will have to decide which connector the purchased adapter will support.

Using a hard drive in a cased version is a fairly simple procedure, so let’s look at how to connect and open a hard drive via USB using a universal adapter (using the example of AGESTAR FUBCP).

Connection procedure

The first thing you need to do is determine the type of HDD connector that you plan to connect via USB. Plugs come in the following types:

SATA (a more modern connector, used in newly built PCs and laptops);

IDE (can be found mainly in “experienced” PCs).

We will consider the connection using the example of AGESTAR FUBCP, since it supports both “old” and modern HDDs. The average cost of such a device is Russian stores electronics is about 1,500 rubles.

The device is equipped with three interfaces (plugs):

SATA (7-pin plug).
IDE 40pin (40-pin plug, for IDE 3.5″).
IDE 44pin (respectively, 44-pin plug, for IDE 1.8″/2.5″).

Description of AGESTAR FUBCP connectors below.

Step-by-step connection of HDD to computer

So, we have determined the connector of the connected hard drive; now it needs to be connected to the corresponding connector on the device. After that, insert the USB connector for data transfer (black) into the USB port of your computer or laptop. If we are working with a laptop hard drive (2.5”), we can turn on the adapter, and the HDD should appear in the list of computer drives. Sometimes, with such a connection, the hard drive may not have enough power and will not be detected by the system. In this case, turn off and connect the red USB connector of the adapter to any of the computer ports and turn on the adapter again.

If the connected hard drive was previously installed in a PC (3.5” format), the power supply from your PC’s USB will not be enough for it. The AGESTAR FUBCP comes with a power supply for 3.5" hard drives. To open the hard drive via USB, first connect it to the appropriate connector (IDE/SATA), then insert the black USB cable into one of the USB ports of the computer, then connect to the adapter a power supply that operates on 220 V (plug it into a power outlet) .

After all cables are securely connected, turn on the adapter. The connection is complete, the hdd will be detected by the computer, and you can work with it.

it-increment.ru

How to connect an external hard drive to a laptop - simple, detailed and accessible instructions for everyone.

How to connect external hard disk for laptop

External hard drives, otherwise known as external HDDs, have long established themselves as a good help for new or outdated laptops. They have an impressive amount of memory and a solid information transfer speed, which helps to store data in safe place, keep everything at your fingertips, share it, or copy content from other media. So, if the “native” hard drive is small or busy, purchasing an external one, for example, a terabyte, will fully justify the investment. However, not every owner of this device knows how to connect an external hard drive to a laptop so that it functions with maximum productivity. Let's consider important nuances connections.

A little theory

If you have never had to connect before external media, then before practical implementation, familiarize yourself with the theoretical part of the process. The hard drive can be connected to a TV, computer or laptop directly. When connected to a TV, it only supports the viewing function.

The first thing that is required from a user who owns an external hard drive is the ability to disassemble and assemble gadgets, and an understanding of the purpose of all available connectors located on the motherboard of a laptop or PC. If you do not know how to connect a hard drive to a laptop, then it is better to entrust the task to a more experienced user. Otherwise, you may accidentally damage the device. If you have minimal knowledge, it will take no more than 15 minutes. Using the contacts for connecting power (on the motherboard), we identify the type of interface available - IDE, SATA or another. How more up-to-date interface, those better speed data transmission. Next, we determine which adapters will be needed for connection, for example, SATA-IDE, SATA-USB or the IDE-USB option. It is necessary to take into account that many laptop models do not have external connectors for connecting hard drives, and they must be connected exclusively via a USB port.

Let's look at the available connection types

So how to connect internal hard disk for laptop? Ubiquitous Interfaces HDD connections- these are IDE and SATA. They differ in the speed of information data transfer - IDE provides only 133 Mbit/s, the more productive and modern SATA - about 6 Gbit/s, while SATA Express will provide all 16 Gbit/s. There are other, more rare interfaces for transmitting information, for example, Thunderbolt for Apple. Let's look at how to connect ide hard disk for laptop. IDE or Integrated Drive Electronics is a parallel interface for connecting drives ( optical drives, hard drives), almost disappeared from the markets computer technology. But, although it is rare, it still occurs, it is necessary to mention it. To the mother's IDE board connects with a wide IDE cable.

If hard disk ide If it is impossible to connect directly to the laptop motherboard, then this is done with an adapter. You can buy an IDE-SATA connector in specialized stores. When purchasing, you need to make sure that the kit includes two cords - a USB cable, a power adapter, a disk with the drivers necessary for the outdated operating system, the adapter itself with connectors and instructions. If a suitable connector is not available, then it is done using USB ports.

Now let's move on to how to connect the hard sata disk to the laptop. SATA or Serial ATA - the so-called serial interface for exchanging information between drives. SATA is considered a more relevant analogue of the ATA (IDE) interface. Fundamentally it is slower than parallel (ATA), but due to the use of higher frequencies SATA interface operates faster than the IDE standard. It connects to the motherboard when SATA help cable. It connects to the laptop either directly to the motherboard, or using an adapter. Each SATA device has its own connector, so there will be no Slave/Master conflict, and several devices can function at the same time.

USB connection

Let's figure out how to connect an external hard drive to a laptop using a USB port? First, we find the parameters of our drive, which are indicated on the case. We connect the 3.5-inch drive to the USB port of the device on one side, and to a power outlet on the other. The problem is that often the power supply of a computer or laptop is not enough to promote a given hard drive. Therefore, connecting to the mains makes it possible to transfer data to a PC at a good speed.

A 2.5-inch HDD must be connected to the hard drive on one side, and to the USB connector on the other. But if the USB port does not “produce” the required 5 V, then the second end of the Y-shaped cable should also be connected to the PC. Then the external drive will receive the missing power and work without failures. The USB port itself also affects the transfer speed. If in the very first USB 1.0 it did not exceed 12 Mb/s, then in USB 2.0 ports data was already transferred at a more serious speed - 480 Mb/s, which was a pretty good result. And USB 3.0 generally offers super speed - about 5 Gbps.

Connection interfaces can be very different. For example, if the laptop is American, then you can use the Firewire or, for example, eSATA interface, which will make this type of HDD universal. When the laptop “sees” the external HDD, it should be tested. On the desktop you need to create a regular document and drag it with the mouse onto the newly connected one external hard drive. If all ports are functioning normally, then this process will last a couple of seconds. If you need to install drivers, use the disk or update the drivers via the Internet, and the hard drive will work like a flash drive. Don't forget to assign a drive letter to your new drive.

Connecting regular and removable hard drives

About how to connect regular hard disk for the laptop was partially written above. When you have selected a suitable adapter, it is connected to the PC hard drive using a suitable connector. If you have an IDE interface, you will need a connector with a wide input, and if SATA, then with a narrow one. Then we take the USB connector coming from the adapter and connect it to the USB controller portable device. Then the hard drive will begin to function as a simple storage device from which information will be received or transmitted. Important: the adapter has a built-in led indicator. Watch the signals it gives: it blinks while transmitting information. Then you can start transferring data.

It remains to find out how to connect removable hard disk for laptop. We take out the USB cable that comes with the hard drive. You can use the cord from any other gadget. We insert one end of it into the side connector on the hard drive box, and the other end of the cable into the USB connector on the side panel of the laptop or PC system unit (behind or front). Click on the “My Computer” shortcut. There, among all the drives, a removable hard drive icon will appear. Double-click on it to open it. Important: to turn off a removable hard drive, you must first close it and click on its icon in the “my computer” manager. Then open the menu with the right mouse button and select the “Eject device” command. Only then do we remove the wire from the connector and put the hard drive in the case.

If you need to constantly use an external hard drive, you need to purchase a container with an adapter for it. This will prevent accidental damage to the device.

Not many people know how to connect a hard drive from a computer to a laptop via USB or directly. The need to make from HDD external storage may arise for a number of reasons: you need to restore an old device and the information stored on it, copy a large amount of data, or use the internal drive as an external drive.

The first step is to remove the hard drive from the PC case yourself. It's easy to do:

unplug the cord from the outlet;
turn off the computer's power supply;
remove the side cover of the housing;
disconnect the wires from motherboard and from HDD;
unscrew the bolts that hold the drive in the socket;
remove the disc.

Do not remove the device yourself if you do not have the skills to assemble and disassemble a computer. It is better to entrust the solution to the problem of how to connect a hard drive from a computer to a laptop to a professional. If the disk is damaged, “cure” bad sectors and it will be difficult to recover information.

Connecting to a computer via USB

The question of how to connect a HDD to a laptop via USB is relevant for those who have switched from using a desktop PC to its portable version.

Connecting a hard drive to a laptop is difficult; it is much easier to connect the drive to a PC via a regular cable. However, having an idea about the device personal computers and them mobile version, it won’t be difficult to figure out how to make an external hard drive. Thus, you will save on purchasing an expensive portable analogue.

First of all, you should think about how to make the internal hard drive external and connect your laptop PC to it. You will need a special box and a wire designed to connect the two devices. The box or pocket is selected depending on the interface: IDE or SATA. The cable used for connection comes in several types. The most convenient is SATA/IDE USB. With this method, one end of the wire should be inserted into the drive connector, and the other should be connected to a port on the laptop.

Check out your DIY removable storage. First, unplug your laptop, plug it in USB output into the connector, press the power button and go to BIOS settings. If the laptop does not recognize the hard drive, check whether the cable is tightly pressed to the port, then you can connect it again to the computer via USB.

It happens that instead of an HDD, a solid state drive. For of this device The storage also has USB output wires, so connecting an SSD is not difficult.

How to connect a hard drive to a laptop via the motherboard

In addition to what is described above, there are several other ways to connect a hard drive to a laptop. How to connect a hard drive to a laptop without a USB cable? Below is a detailed description.

Modern HDDs tend to become more compact every year, so they can be installed in a laptop case. This is convenient when the “native” hard drive is broken or faulty, and you have an extra one from an old PC on hand. The adapter for the board is cheaper than the USB analogue.

This method is more complicated than how to connect an HDD via USB. You will need to spend more time; you will have to disassemble not only the computer case, but also the portable device.

You need to disassemble your mobile PC step by step:

Disconnect from power.
Remove the battery.
Unscrew the bolts securing top cover, carefully remove without damaging the fasteners.
Disconnect the keyboard cables from the board and remove it.
Unscrew the bolts on the board and carefully remove it, after disconnecting the cables, hard drive and other components.

After this, connect one end of the adapter to the board and the other to the device. Reassemble the laptop using the reverse algorithm and insert the disk into the desired compartment. If the dimensions of the device exceed the dimensions of the socket or additional memory is needed, then you can, by analogy with the method of connecting a hard drive via USB, make an external hard drive out of it.

Described above general scheme, in practice, each model laptop computer unique.

Is it possible to deal with the question of how to connect a hard drive to a computer yourself without experience in repairing equipment? The answer is no! A sudden movement or an incorrectly screwed bolt can break one of the connecting cables. Subsequent repairs can cost you many times more.

Knowing the structural features of a desktop and portable PC, you will be able to solve the question of how to connect a hard drive from a laptop to a computer or vice versa, and how to remake old HDD in a portable one. These skills will help you save time and money. Another advantage is that you can create a unique style for your drive: choose or order a case with an individual pattern or an interesting shape, choose a case or pouch of the right size.