192.168 1.1 login personal account. WiFi router's personal account - what is it ?! What password options can there be


This manual will tell you how to install, connect and configure a Wi-Fi router by logging into the admin panel http://192.168.0.1 or http://192.168.1.1 for D-Link DIR-300 and DIR-615, TP- Link TL-WR740N and TL-WR841N, Tenda N301 and other routers using these IP addresses to access Personal Area. This information will be useful for everyone who sets up a Wi-Fi, Internet or IPTV wireless network for the first time in their apartment or in a private house.

The sequence of actions that will allow you to enter the settings of the router is as follows:

1. We turn on our modem or router.

2. We connect it network LAN cable with a computer or laptop

3. We launch the web browser ( Google chrome, Internet Explorer, Opera).

4. V address bar you must enter the IP address of the router. Depending on the model and brand of the router (TP-Link, Dlink, Tenda, etc.), they can be as follows:

  • 192.168.0.1
  • 192.168.0.10
  • 192.168.0.50
  • 192.168.1.1
  • 192.168.8.1
  • 192.168.88.1
  • 192.168.100.1

Also, instead of IP, a symbolic site address can be used:

  • tplinklogin.net
  • tplinkwifi.net
  • tplinkmodem.net
  • routerlogin.net
  • my.keenetic.net
  • netis.cc

WiFi router's personal account - what is it ?!

Login to your personal account WiFi router it is easy enough to set it up. To do this, just write down its ip-address - http://192.168.0.1 or http://192.168.1.1 - in the address bar of your browser. Many users refer to the web interface as the site of a router and believe that in order to access it, you need an Internet connection. This is not true. On the contrary, for initial setup it is not recommended to connect the provider's cable to the device before the required parameters are specified.

If you do not know which IP is used on your router - 192.168.0.1, 192.168.1.1 or another - you can use the hint that the manufacturer left for users in the form of a sticker. You can find it on the back or bottom of the case. Here's an example for the D-Link DIR-300:

As you can see, the D-Link router uses 192.168.0.1 login admin, password admin.

And here is the sticker on the Rostelecom Sagemcom router [email protected] 2804 v7:

On this model, the IP is used to enter the web interface. 192.168.1.1 admin / admin.

How to further configure the router

So, you managed to go into the settings of the router and do not know what to do with it next ?! The procedure is usually as follows. First you need to set up your internet connection. this is done in the "WAN" or "Internet" section. To get it right, first find out in technical support your service provider - what protocol do you use - PPPoE, IPoE or something else. If PPPoE is used, then you also need a login and password to connect.

If you have a static IP address, then you need information about the used address, mask, gateway and DNS server.

The second step is usually to set up a WiFi network. Everything here is usually easy and simple. You must first come up with a name wireless network- SSID. Then - the password for Wi-Fi. It is better to use as a password key phrase not shorter than 8-10 symbols and numbers and letters of the Latin alphabet.

The third stage is IPTV setup- digital interactive TV. Usually, one of the LAN ports is separated for this, which is configured for an STB set-top box.

Sometimes, for the operation of some programs or games, it is also necessary to configure port forwarding or other services. After that, the router settings are saved and you can connect the provider's WAN cable to the connector on the router.

For more information on your router model, look on the Internet.

Login 192.168.0.1 or 192.168.1.1 - the page is inaccessible and does not open

Although the customization process is network devices for a home and a small office is a relatively simple matter, nevertheless, very often users face difficulties. This is especially true for beginners. One of frequent problems is that when trying to access the router at http://192.168.0.1 (or via http://192.168.1.1), the user gets an error “page not found” and the web interface does not open. There are the following ways to solve it.

1. Try a different web browser. Often you have to deal with the fact that due to a malfunction or a crooked cache from the web browser, it is impossible to log into the router. Try clearing your cache and cookies. Doesn't help - use another browser. As practice shows, Internet Explorer is best for accessing the settings of network devices through 192.168.0.1 and Microsoft Edge... You can also try to try to login using safe mode browser. Google Chrome calls this mode "Incognito".

2. Disable antivirus software and firewall. Very often, the computer does not log into the router due to the fact that for some reason it is blocked by the antivirus. A striking example is Kaspersky Free Antivirus, which you have to completely deactivate to get into the configurator of your modem or router.

3. Check the settings network card... Very often you have to deal with the fact that users in the parameters network board any addresses are spelled out. Of course, with such settings, you will not be able to log into the router at http://192.168.0.1 or http://192.168.1.1. To check it open Windows options and go to the section Network and Internet | Ethernet... and click on the line "Configuring adapter parameters":

Next, in the list of network connections, select the adapter through which you are connected to the router or modem and click on it right click... Select the "Properties" menu item to open the following window:

Double click on the line IP version 4 (TCP / IPv4) and we see this window:

In most cases, for a successful connection to the router, it is enough to leave the receipt of addresses in automatic mode... If in this way the entrance to D-Link, TP-Link or Tenda via 192.168.0.1 is not available, try to register the parameters manually:

We register the values ​​as in the picture:

IP address - 192.168.0.222 mask - 255.255.255.0 Gateway - 192.168.0.1 DNS - 192.168.0.1

click on the "OK" button and check the access to the network device.

4. Try connecting to the router from your phone via WiFi. For this, many manufacturers even have special mobile applications to configure routers. For example, TP-Link Tether, D-Link WiFi, Zyxel My.Keenetic, etc.

5. If all else fails, try resetting the router with the Reset button.
It is located on the back of the device. Use a paper clip or pencil to press. It is necessary to hold Reset in the pressed state for about 8-10 seconds, then release it.

To set up a router or modem, you need to go to its settings. It's not difficult, you can follow the instructions:, or. Even in the process of entering the settings, you can encounter many problems. One of these popular problems is when it doesn't fit. admin password, or the username admin when trying to enter the settings at 192.168.1.1, or 192.168.0.1.

In the articles, the links to which I gave above, I wrote that in the settings of each router, or modem, you can go to the IP address 192.168.1.1, or 192.168.0.1. You can see the address on the bottom of your router. There should be a sticker on which it is indicated.

To access the web-based interface of the router, you need to specify a username and password. Typically, the default password is admin and the username is admin. But not all manufacturers. And when we indicate the admin password on the login page (or other data for your manufacturer) and the same username, then we may not get into the settings. The page will just reload and that's it. Or, we will see a message that the password is incorrect. Well, we will not get access to the settings of the router. If you have any other problem logging into the router settings page, then see this article.

The admin password does not match when entering the router settings

You specify admin and admin, but do not enter the settings. "Invalid password" error, or " wrong name user ". Now let's try to fix everything.

Basically, there are three reasons:

  • You, or the wizard who set up the router for you changed the password from admin to something else. Maybe he changed his username too. So they don't fit.
  • Some kind of router malfunction.
  • Enter the wrong password / login, which is used by default.

Solutions:

  • First of all, we clarify what data needs to be specified specifically on your router. To do this, we are looking for information on the device itself. Or, see the manufacturer information in this article.
  • Try to go to the settings from a different browser. In the comments, they shared information, which, for example, through Chrome password admin did not fit, but in Internet browser Explorer everything worked and the settings opened.
  • Next, try to remember, maybe you wrote down the password somewhere. Perhaps you still remember him :)
  • Well, the most reliable solution is to reset the router settings. According to the idea, after this procedure, the settings will be available by standard password and login.

It is not difficult to reset the parameters to factory defaults. Find the button on the body of your router RESET... It can be recessed into the body, in which case, you need to press on it with something sharp.

Also, RESET can be on one button with WPS.

Necessary click on the RESET button and hold for 10 seconds maybe longer. The router should reboot. After that, try to go to the control panel. If something does not work out, then on our website there are instructions for resetting the settings for all popular routers.

Standard username and password for different routers

Let's find out what kind of password and login is used by default on your router. As I wrote above, this information can be found on the device itself.

On routers Tp-Link: address - 192.168.1.1 (maybe 192.168.0.1)... Login and password are admin and admin.

On D-Link: address - 192.168.0.1. The username and password are admin and admin. Or, we simply do not fill in the password field.

Devices Zyxel: address 192.168.1.1 (or my.keenetic.net). Login - admin. And the password is 1234. On ZyXEL Keenetic Start this information is not specified. By default, the settings are not protected. The router itself will ask you to set a password.

Routers Linksys: address - 192.168.1.1. Username and password are admin. For some reason, they do not indicate this information on the device itself. Probably because they want Linksys routers to configure using special program included on the disc.

Asus: address - 192.168.1.1. User Name - admin, Password - also admin.

On Tenda: address - 192.168.0.1. Login - admin. Password - leave the field blank.

If you follow the instructions, the settings page should open.

192.168.0.1 is the address for entering the router to which the device is connected via a local or wireless network. The entrance address is different for manufacturers and models. 192.168.0.1 is relevant for most routers of companies: TP-Link; D-Link; Asus; Zyxe; Tenda; Huawei; Cisco; Qtech; NetGear; ZTE and others. The address and access for entering, often admin - admin, of the router used is indicated on a sticker on the back of the modem and in the operating instructions. In this article, we will consider entering your personal account and fixing connection errors.

Connecting the router via 192.168.0.1 to a computer, laptop or wireless device

If the router is already connected to the computer and is working or working, skip this step and go to the next item. For owners of a new router or a factory-reset one, we will start from the moment when the device is pulled out of the box (and how else did you know that you need to log in at 192.168.0.1). Let's decide how we want to enter the router, by local connection via wire or Wi-Fi.

Log in to the router via a wire on the local network


Log in to your router's personal account via Wi-Fi

Access to the login page of the router control panel is possible on devices with a Wi-Fi receiver: phone; tablet; and on Android OS, Windows Phone or IOS. The main thing is that the router should be able to distribute Wi-Fi.

  1. We connect the router to an outlet and turn it on with the "On" button;
  2. if you need to activate the button for Wi-Fi transmission, press;
  3. on back side modem, we look at the network key, often indicated by the SSID, and the wireless network password;
  4. in the device being logged in, we connect to the WiFi network of the router and enter the specified password;
  5. open the browser and enter 192.168.0.1 in the address bar
  6. the personal account of the router will be loaded, enter the access data (admin - admin).

Ideally, go to the router settings page. 99% that readers of this article have encountered a problem that prevents them from entering their personal account. Let's figure it out.

192.168.0.1 - do not enter, the page is not available in the browser


Let's check the parameters before doing complex things and hope that the error crept in due to inattention:

Make sure the computer is connected with a LAN cable to the router. Checked on the icon:

if there is no connection, try turning on the router through a different port. On mobile devices, it is easier if WiFi is connected, then the connection to the modem is present;

take a close look at where the IP address is entered. It is required to enter into the address bar of the browser (point 1 in the first picture of the article);

check the address again, 192.168.0.1 is one hundred ninety two point one hundred sixty eight point zero point one. Not a comma, not a dash, not an O. Error options: "192 168 0 1", "192, 168, 0, 1"; 192, 168, o, 1, 192.168.o.1;
go from another browser;
clear the cache of the browser you are logging in from:
* insert reset table *
try to temporarily disable windows firewall;
when using a firewall or antivirus, temporarily deactivate programs, for example: Nod32, Kaspersky, Avast;
reboot the device and router;
go to the router settings at 192.168.0.1 from another device;
when connecting to the router with a Lan cable, change the LAN port on the router;
make sure the cable is plugged into the Lan port and not the Ethernet where the internet is coming from.
check that the browser is not using a proxy server. To do this, go to the "Control Panel" Windows ", go to" Internet Options ". If the proxy is active, disable it and try again.

If nothing helped and no problems were found after the check, then we will find the problem in another way.

Checking the availability of the router by IP 192.168.0.1

We open command line and execute the command

ping 192.168.0.1

If the answer is "the request timeout has been exceeded" or "the node could not be found", then we try to change the Lan-port of the connection on the router, if the router pings and there are no errors,


then we proceed to setting up a network connection.

Network settings for access to IP 192.168.0.1

We go to network connections through the control panel, command line or through context menu taskbar.

We select the item "change adapter settings", if you logged in from Windows 10, in Windows xp, 7, Vista, 8 the item is called "adapter settings".

In the window that opens, we are looking for our network connection, click on it with the right mouse button and go to properties.

Double click on IP version 4 TCP IPv4. Modern routers and providers do not require hard-coding data for connection, if the numbers are filled in the menu, try switching to "get IP addresses automatically" and "get DNS servers automatically". If the option is already selected, we will fill in the addresses manually.

To do this, change the option to "use the following IP address" and "use the following DNS server addresses". We prescribe the following:

  • IP address - 192.168.0.3
  • mask - 255.255.255.0
  • Gateway - 192.168.0.1
  • DNS - 192.168.0.1

Check the access to the control panel, if this does not help, then there are two ways.

Hard-reset resets the router settings to factory defaults. Information, including ISP and internal passwords on Wi-Fi will be lost. Repeat the recommendations described above;
call the wizard or take the router for diagnostics to the service center.

The instruction is suitable for routers:

  • Routers TP-Link: TL-WR702N; TL-WR720N; TL-WR740N; TL-WR741ND; TL-WR743ND; TL-WR841N; TL-WR841ND; TL-WR842ND; TL-WR843ND; TL-WR940N; TL-WR941ND; TL-WR1043ND; Archer C10; Archer C50; Archer C20.
  • Routers Asus: RT N10; RT N10p; RT N12.
  • D-Link WiFi Routers: DIR-100 (F | FE); DIR-120; DIR-130; DIR-140L; DIR-300; DIR-300A (C1 | D1 | C1 | NRU); DIR-320; DIR-320A (D1 | NRU); DIR-330; DIR-400; DIR-412; DIR-450; DIR-451; DIR-456; DIR-456 C1; DIR-457; DIR-457U; DIR-506L; DIR-615 (FB O1 | K2 | K1 | M1); DIR-620 (D F1 | S G1; DIR-628; DIR-632; DIR-635; DIR-636L; DIR-640L; DIR-645; DIR-651; DIR-655; DIR-685; DIR-806A; DIR-815 (A C1A); DIR-825 (A D1A).
  • D-Link ADSL modems: DSL-300 (T); DSL-302 (G | T); DSL-306; DSL-310; DSL-360 (I; T); DSL-500 (G | T); DSL-502 (G | T); DSL-504 (G | T); DSL-506; DSL-510; DSL-514; DSL-520T; DSL-524T; DSL-560I; DSL-562T; DSL-564T; DSL-584T; DSL-604 (+ G | G); DSL-700; DSL-1510G; DSL-2300U; DSL-2500U (BRU | C | D | DB); DSL-2520U (BRU | C | D | D8); DSL-2540U (BRU | C | C2 | C3B | CB | D | DB); DSL-2600U (BRU | C | C2); DSL-2640U (BRU); DSL-2650U; DSL-2740U (BRU); DSL-2750U; DSL-2760U (BRU | C | D); DSL-6540U; DSL-6641i; DSL-6740U; DSL-7850; DSL-G604T; DSL-G804V.
  • Routers Tenda: n3; n300; n304; w268r; n304; n630; w308r; w309r; w316r; w368r; w311m; w522u.

To connect to a router, try using IP synonyms:
192.168.0.10, 192.168.0.50, 192.168.8.1, 192.168.88.1, 192.168.100.1

Manufacturers created connections to replace IP 192.168.0.1 using named domains:

TP-Link:, tplinkwifi.net, tplinkmodem.net
NetGear: routerlogin.net
Zyxel: my.keenetic. net
Netis: netis.cc

Video instructions for entering the router

For an ordinary user, the process of setting up a router seems like something scary and impossible. It is very rare, but it happens that the parameters go astray, and then you have to try to restore them manually. In order to log in to the system, 192.168.10.1 must be entered to configure the router in the address bar of the browser.

Reasons for failed router settings

Many people mistakenly believe that if the settings have failed, then the problem is in the router. However, if the router is working properly, all the icons are on, and there is no suspicious smell of burnt plastic, then you should not look for the cause of the breakdown in it. As a rule, failures occur due to violations in the settings of the network card and computer.

Most misunderstandings at work computer equipment happens due to the fault of "advanced" users who think they know a little about what they are doing. And then a question of chance, idle curiosity or a desire to do "what is best" can reset the settings to the factory settings. Even simple accidental press Reset buttons on the device can cause data loss. It is better to find it and remember the location in order to avoid repeated incidents in the future.

Entering settings

So, if a factory reset has already occurred or was purchased new router, then you need to configure them again yourself. There is nothing difficult in this, and after reading this article, anyone, even the slowest beginner, will be able to figure it out.

The first step to take is to check the connection. An internet network cable must be connected to the router, like all computers. When this is verified, you need to go to a web browser on your computer. The browser can be any of the available ones, "Opera", "Chrome" and others.

In the address bar of the browser, enter "192.168.10.1" without quotes and press the "Enter" key. The web page should display windows for entering a username and password.

As a rule, the IP address for entering 192.168.0.1 (router settings) is standard. Sometimes there are exceptions, it depends on the router model. From the manufacturer on reverse side device or in the manual must be indicated alternative address to enter.

If everything went according to the plan and the window for data entry was displayed, then you need to enter them. Usually, they use login, 12345 or admin for the login (192.168.10.1 is not the only address at which similar logins can operate - they include everything provided for the router settings). The password can also be similar standard words used for such combinations. It can be either password or 12345; among the login / password combinations, admin / admin is often found.

Setting a new password for the router

After the password, the first necessary action... It is done in the "Settings" or "Change password" tab.

By setting New Password for private or public network, it is recommended to remember about safety and use the maximum complex code... It is best to use a set of letters and numbers of at least twelve characters.

In order not to forget your password, it is best to come up with a short phrase that will be easy to remember. Often, when visiting the house during a friendly visit, guests ask for the password for the WiFi. This must be borne in mind when coming up with an unusual set of words for the entrance.

Standard configuration methods at 192.168.10.1

It is rarely necessary to prescribe settings in modern routers, usually this happens automatically and does not cause any problems for new users. Also, almost every router has an option quick setup which is always convenient to use. In this tab, you only need to select the name of the network and set a password, select the type of connection. For most, this will be a dynamic IP, which is denoted by the abbreviation DHCP. There may be other options, they are found out by calling the operator of the Internet company.

When the information from the provider is received, for reliability, you can restart the device or computer, then all the information received will be updated. However, before exiting, do not forget to save the settings in your browser by clicking on the "Save" button. This will save you from the unnecessary pain of re-filling information.

What does 192.168.10.1 mean?

A set of numbers with dots seems to be for ordinary users something strange and incomprehensible. In fact, the IP address is written in this form - a unique network address of a node in a network using the TCP / IP protocol.

Each Internet-facing network has its own or dynamic IP address provided by the ISP. But there are several IP addresses that cannot be used for these purposes, but are intended for intranet, local use. In another way, such networks are called private. The list of addresses for internal use is predefined by the administrator or set by default.

Frequent problems

Sometimes it is not possible to configure the router. This can be hindered by various circumstances, but the most frequent of them are: the login page in the browser is not displayed or, after all the settings, the Wi-Fi is still not distributed.

If you can't log in, in 99% of cases restarting the router helps. It seems like this is a completely unnecessary condition and a useless action, but a simple reboot can often help.

The same must be done in the absence of a Wi-Fi signal, you need to find a button for restarting on the equipment, turn off the device for a couple of minutes, and then turn it on again. When rebooting, it is recommended that you disconnect and reconnect all cables to avoid bad connections.

How do I set up a router? How to get ? How to enter your Personal Account for setting D-Link routers, TP-Link or Tenda. Read about this and much more below. Especially for you - detailed step-by-step instruction with video and screenshots. Let's figure it out together with all the features of authorization on 192.168.0.1 and the login admin admin.

You bought, borrowed from someone a modem or router and are going to configure it yourself. Perhaps you have already purchased a new device or the old ones have lost the settings and you need to restore all the parameters again. Want to set and set parameters Wi-Fi connections(Name, Network Name, Password) and Internet.

Do you want to set up the distribution of the Internet in your house or apartment via Wi-Fi to your other devices - a phone, smartphone, tablet, TV, laptop or computer. To do this, you will need using the login: admin and password: admin (the admin panel of the router or the Personal Account).

Before doing this, carefully study the user manual, instructions and the case of the device itself. Usually, manufacturers indicate all the data necessary for entering and setting up on a sticker. Look for this sticker on the bottom of your Tplink, Dlink or Tenda router or modem.

To make it easier to understand, I suggest watching the video: 192.168.0.1 - Personal Account.

Personal account of modems and Wi-Fi routers Tplink, Dlink and Tenda are used to configure parameters wireless connection and internet connections. It is located at a special ip-address for easy access to the router settings. In our case, this is http://192.168.0.1, but for some models, 192.168.1.1 is often used.

Due to the peculiarities of the device of routers, access points, routers, modems and other network gadgets - logging into 192.168.0.1 is the most convenient and practical way to log into your personal account. Although 192.168.0.1 looks like a website address on the Internet, it really isn't. This path is local and is the same as your own. network address the wi-fi router itself or other configurable network device.

How is it convenient to access D-Link, TP-Link and Tenda Personal Account - settings via http://192.168.0.1 by admin admin?

  • There is no need to install additional software, it is already preinstalled.
  • The firmware of the router is protected by the manufacturer, users cannot make changes or disrupt its operation.
  • Access to the Personal Account and admin-panel does not depend on the type and version operating system(Windows 7, 8, 10, Linux, etc.). You can log into the router through 192.168.0.1 by admin admin from any mobile device, phone, smartphone, tablet (iOS, Android) or laptop.
  • It is convenient to connect over the network and administer access rights to 192.168.0.1 (allow one to enter and close authorization from others).

192.168.0.1 admin admin - login for D-Link, Tenda and TP-Link.

What actions become available after authorization (login: admin password: admin) on 192.168.0.1? After entering the admin panel, you can:

  • Manage Internet connection settings.
  • Set and change the password for wi-fi.
  • Change the password for accessing the settings of the router or modem.
  • Set and modify Wi-Fi name networks in the house.
  • Forward ports.
  • Connect and configure a 3G, 4G LTE mobile USB modem with a SIM card from Megafon, Beeline or MTS.
  • Manage a DHCP server and configure the distribution of IP addresses to other devices on the network (phones, smartphones, tablets, laptops, set-top boxes, TVs, etc.)
  • Tune digital television(iptv).
  • And much more.

Step by step instructions with screenshots:


It was not possible to log into the router at 192.168.0.1 or admin admin does not work.

In case of problems with access to 192.168.0.1, the following errors may appear in the browser:


How to solve problems with access to http://192.168.1.1 and authorization by admin admin:


192.168.0.1 - additional information.

If you didn’t find the answer to your question, I propose to study in detail useful information and additional links


2021 gtavrl.ru.